Hello
A friend of mine needs a crank for his Edison Square Box Standard, can anyone help?
Thanks
John Robles
Need Edison square box Standard crank
- john9ten
- Victor II
- Posts: 394
- Joined: Wed Nov 18, 2009 9:13 pm
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Need Edison square box Standard crank
The earliest square top Standards have a different crank than the later ones. I don't know if the dividing line was the change from two to four clip but I do know there is a difference. The winding shaft is smaller on the early machines. Jerry Blais
- Andersun
- Victor III
- Posts: 863
- Joined: Thu Jan 08, 2009 10:38 am
- Location: Oldsmar
- Contact:
Re: Need Edison square box Standard crank
There is one on eBay right now.