Make: Zon-o-phone - Universal Talking Machine Mfg Co.
Model: Grand Opera Tapering Arm
Serial #:
Year(s) Made: 1906-1912
Original Cost: $60
Case/Cabinet Size: 15 ½" x 15 ½" x 8 ½"
Turntable/Mandrel: 10" cast iron turntable
Reproducer/Sound-Box: Zon-o-phone (Exhibition type)
Motor: 3-spring
Horn Dimensions: Morning Glory, 27" long, 22 ½" bell, wood grain finish or all brass
Reproduction Parts: one corner column, reproducer gaskets
Current Value: $2,500 - $3,500
Interesting Facts: This machine was produced after Victor acquired the Universal Talking Machine Mfg Co. in 1903. Zon-o-phones continued to be manufactured as a lower cost alternative to Victor and with no obvious connection to the VTM. Both reproducers and motors were nearly identical to Victor machines. With this being the second most expensive Zon-o-phone model and with it's three spring motor it was Zon-o-phone's equivalent to a Victor V (at the same price), albeit much smaller in size and with only a 10" turntable. At first it was offered with a metal morning glory horn, either in wood grain finish or in all brass. Later the top Zon-o-phone models were offered with wood horns at no additional cost.
Just recently at Union I was able to purchase an all brass morning glory horn - thanks to Jerry Blais. Most of the pictures below have been taken earlier with the regular oak grain morning glory horn. I think it looks great with either horn, but the all brass looks a bit more elegant.
Featured Phonograph № 117 - Zon-o-phone Grand Opera
- alang
- VTLA
- Posts: 3115
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
- alang
- VTLA
- Posts: 3115
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
Featured Phonograph № 117 - Zon-o-phone Grand Opera - more p
And here some pictures with the new all brass morning glory horn.
Here it is in its new habitat
An early ad from shortly after it was released lists it with either a regular (trumpet?) or all brass morning glory horn.
And a later ad with the free wood horns:
Here it is in its new habitat
An early ad from shortly after it was released lists it with either a regular (trumpet?) or all brass morning glory horn.
And a later ad with the free wood horns:
Last edited by alang on Sat Jun 20, 2015 1:49 pm, edited 1 time in total.
-
- Victor IV
- Posts: 1063
- Joined: Thu Jan 08, 2009 7:00 am
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
Wow! This is a very impressing Zonophone, especially with the brass horn. Great images also.
Although it matches the brass horn, I would nickel plate the elbow, as in original condition. Did anybody find a proper way to prevent the elbow from partially slipping out of the back bracket?
Although it matches the brass horn, I would nickel plate the elbow, as in original condition. Did anybody find a proper way to prevent the elbow from partially slipping out of the back bracket?
-
- Victor I
- Posts: 115
- Joined: Mon Feb 16, 2009 2:44 pm
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
Nice machine. I have one just like it but mine has a all brass horn. They are nice machines to have. Jerry
-
- Victor IV
- Posts: 1313
- Joined: Sun Mar 08, 2009 12:23 am
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
I like the machine with either horn. It is beautiful. I noticed in the brochures that the machine came with a woodgrain horn. Was the brass horn an option or a later 3rd party horn?
Dan
Dan
- alang
- VTLA
- Posts: 3115
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
Thanks. To the best of my knowledge the brass elbow that is fixed to the horn is a signature of these Zonophones and is all original. Elbows on both horns seem to be lacquered over the brass, so they are not polished at all. I have been searching for Zonophone horns for a while and none that I saw had a nickel plated elbow.Starkton wrote:Wow! This is a very impressing Zonophone, especially with the brass horn. Great images also.
Although it matches the brass horn, I would nickel plate the elbow, as in original condition. Did anybody find a proper way to prevent the elbow from partially slipping out of the back bracket?
Andreas
- alang
- VTLA
- Posts: 3115
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
In the catalog sown it was listed with a wood grain horn, but if you look at the "New Tapering Arm Zon-o-phone" ad I posted it lists it with a choice of either regular pr all brass morning glory horn. The all brass MG horn is also listed in the catalog for $12, so both configurations are correct and have at some point been standard configuration.melvind wrote:I like the machine with either horn. It is beautiful. I noticed in the brochures that the machine came with a woodgrain horn. Was the brass horn an option or a later 3rd party horn?
Dan
Thanks
Andreas
- vic-b
- Victor I
- Posts: 198
- Joined: Fri Jun 27, 2014 11:35 am
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
The horn elbows are brass. They were not nickled to my knowledge. As for the slippage? You have to make sure the elbow is round, and not flattened, or slightly ovaled. Unfortunately, sometimes the only thing that you can do is use something to "shim" the horn.
Jeff
Wisconsin
Jeff
Wisconsin
-
- Victor VI
- Posts: 3946
- Joined: Mon Nov 16, 2009 9:42 am
- Location: Western Canada
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
As a recent first time owner of a Zonophone (see the June cover and article in The Antique Phonograph), I am very surprised at how well designed and built they are.
If I was Berliner or Johnson.....I would have been most concerned when this brand hit the market in the late Winter,early Spring of 1900.
Thank you for sharing your machine... .
If I was Berliner or Johnson.....I would have been most concerned when this brand hit the market in the late Winter,early Spring of 1900.
Thank you for sharing your machine... .
- ChuckA
- Victor III
- Posts: 547
- Joined: Thu Jan 15, 2009 6:32 pm
- Personal Text: Learn from the mistakes of others - You can't live long enough to make them all yourself.
- Location: South Eastern PA
- Contact:
Re: Featured Phonograph № 117 - Zon-o-phone Grand Opera
Beautiful machine, I like the wood grain horn.
That model was the first Zonophone I ever bought, way back in 1972, at a not so local auction and it was just about 10pm when it sold. I got caught up in the bidding and paid $300, which was more than I had with me so I had to drive home to get checkbook and drive back to pay for it.
It had the large nickel horn:
Chuck
That model was the first Zonophone I ever bought, way back in 1972, at a not so local auction and it was just about 10pm when it sold. I got caught up in the bidding and paid $300, which was more than I had with me so I had to drive home to get checkbook and drive back to pay for it.
It had the large nickel horn:
Chuck