My recently acquired 1-C Long Playing Console:
1) What is the model? Long Playing console: 1-C
2) What is the serial number on the dataplate? 1054
3) Is there a speed control knob present in the left hand corner of the motor-plate? NO
4) What finish is present on the hardware and reproducer? "Gun-metal"
5) Which reproducer(s) are present? Edisonic/New Standard ("square" weight type), and Long Playing reproducers present
6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? N/A
7) Does your Phonograph have the "10 and 12 inch" buttons present? NO
8) Are there any other special attachments present: Double reproducer holder as original -- mounted to rear of turntable compartment
9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? NO
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? Cabinet Factory No.18
Missing: Crank escutcheon, door pull knobs, grille material destroyed and/or missing, door panel decorative moldings missing -- except ONE corner piece. Overall, unit in poor condition and finish very moldy. Purchased 3-20-2016 at an estate auction held by "Sweet & Harding" in Lockport, NY.
Fran
Edisonic and Long Playing Consoles Survey
- fran604g
- Victor VI
- Posts: 3988
- Joined: Mon Mar 04, 2013 2:22 pm
- Personal Text: I'm Feeling Cranky
- Location: Hemlock, NY
Re: Edisonic and Long Playing Consoles Survey
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
- fran604g
- Victor VI
- Posts: 3988
- Joined: Mon Mar 04, 2013 2:22 pm
- Personal Text: I'm Feeling Cranky
- Location: Hemlock, NY
Re: Edisonic and Long Playing Consoles Survey
Hiya folks!
Incidentally: does anyone know why there is this cleat inside the turntable compartment? The 1-C didn't have a turntable trim-piece did it?
Best,
Fran
EDIT: I realize now that the cleat is merely a "blind stop" for the cabinet door, to prevent it from over-travel when closing.
Incidentally: does anyone know why there is this cleat inside the turntable compartment? The 1-C didn't have a turntable trim-piece did it?
Best,
Fran
EDIT: I realize now that the cleat is merely a "blind stop" for the cabinet door, to prevent it from over-travel when closing.
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
-
- Victor IV
- Posts: 1002
- Joined: Thu Jan 08, 2009 7:22 am
Re: Edisonic and Long Playing Consoles Survey
Mine may already be in the survey... but here is my 3-C.
1) What is the model? Long Playing console: 3-C
2) What is the serial number on the dataplate? "675"
3) Is there a speed control knob present in the left hand corner of the motor-plate? "YES"
4) What finish is present on the hardware and reproducer? "Gun-metal"
5) Which reproducer(s) are present? "Regular"
6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? "YES"
7) Does your Phonograph have the "10 and 12 inch" buttons present? "YES"
8) Are there any other special attachments present: double reproducer holder
or any other interesting additional features? "New Laboratory Model" on decal
9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? "NO"
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "N/A"
https://www.youtube.com/watch?v=W62mP1x46T8
Video is a few years old now... I should probably make a new HD video for posterity. I pretty much never play these long play discs (for good reason!).
1) What is the model? Long Playing console: 3-C
2) What is the serial number on the dataplate? "675"
3) Is there a speed control knob present in the left hand corner of the motor-plate? "YES"
4) What finish is present on the hardware and reproducer? "Gun-metal"
5) Which reproducer(s) are present? "Regular"
6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? "YES"
7) Does your Phonograph have the "10 and 12 inch" buttons present? "YES"
8) Are there any other special attachments present: double reproducer holder
or any other interesting additional features? "New Laboratory Model" on decal
9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? "NO"
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "N/A"
https://www.youtube.com/watch?v=W62mP1x46T8
Video is a few years old now... I should probably make a new HD video for posterity. I pretty much never play these long play discs (for good reason!).
- Attachments
-
- Edison 3-C Long Play 3.JPG (128.76 KiB) Viewed 2622 times
Last edited by phonophan79 on Sat Apr 09, 2016 9:28 am, edited 1 time in total.
- fran604g
- Victor VI
- Posts: 3988
- Joined: Mon Mar 04, 2013 2:22 pm
- Personal Text: I'm Feeling Cranky
- Location: Hemlock, NY
Re: Edisonic and Long Playing Consoles Survey
Hi phonophan79!phonophan79 wrote:Mine may already be in the survey... but here is my 3-C.
Serial # 675
https://www.youtube.com/watch?v=W62mP1x46T8
Video is a few years old now... I should probably make a new HD video for posterity. I pretty much never play these long play discs (for good reason!).
Also, mine does have 10/12 buttons.
Sorry it took me so long to respond, my posts get buried pretty quickly sometimes, and I just got back to this one.
I don't have your 3-C on file (so to speak), would you be kind enough to take the entire survey on page 1 of this thread, I don't want to overlook anything?
In the meantime, I'll enter this info into my spreadsheet.
Thank you,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
- fran604g
- Victor VI
- Posts: 3988
- Joined: Mon Mar 04, 2013 2:22 pm
- Personal Text: I'm Feeling Cranky
- Location: Hemlock, NY
Re: Edisonic and Long Playing Consoles Survey
Thank you!phonophan79 wrote:Mine may already be in the survey... but here is my 3-C.
1) What is the model? Long Playing console: 3-C
2) What is the serial number on the dataplate? "675"
3) Is there a speed control knob present in the left hand corner of the motor-plate? "YES"
4) What finish is present on the hardware and reproducer? "Gun-metal"
5) Which reproducer(s) are present? "Regular"
6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? "YES"
7) Does your Phonograph have the "10 and 12 inch" buttons present? "YES"
8) Are there any other special attachments present: double reproducer holder
or any other interesting additional features? "New Laboratory Model" on decal
9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? "NO"
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "N/A"
https://www.youtube.com/watch?v=W62mP1x46T8
Video is a few years old now... I should probably make a new HD video for posterity. I pretty much never play these long play discs (for good reason!).
I appreciate your taking the time to add your information to the survey!
Best,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
- rizbone
- Victor III
- Posts: 544
- Joined: Tue May 08, 2012 6:17 pm
- Location: Maryland
Re: Edisonic and Long Playing Consoles Survey
Hello. I just picked up a Schubert in Bowie MD. Here is the information for the database.
1) What is the model? Schubert(CLT)
2) What is the serial number on the dataplate? "4574"
3) Is there a speed control knob present in the left hand corner of the motor-plate? No
4) What finish is present on the hardware and reproducer? "Gun-metal"
5) Which reproducer(s) are present? "Edisonic"and Lateral Adapter
6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? No
7) Does your Phonograph have the "10 and 12 inch" buttons present? No
8) Are there any other special attachments present: Such as; tone arm adapters, other soundboxes or reproducers, single or double reproducer holder, needle cups, or any other interesting additional features? Please list each with any observed manufacturer identification, if possible. None
9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? Please describe in detail with location if affixed to Phonograph.Cabinet factory sticker
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "Cabinet Factory No.18"
1) What is the model? Schubert(CLT)
2) What is the serial number on the dataplate? "4574"
3) Is there a speed control knob present in the left hand corner of the motor-plate? No
4) What finish is present on the hardware and reproducer? "Gun-metal"
5) Which reproducer(s) are present? "Edisonic"and Lateral Adapter
6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? No
7) Does your Phonograph have the "10 and 12 inch" buttons present? No
8) Are there any other special attachments present: Such as; tone arm adapters, other soundboxes or reproducers, single or double reproducer holder, needle cups, or any other interesting additional features? Please list each with any observed manufacturer identification, if possible. None
9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? Please describe in detail with location if affixed to Phonograph.Cabinet factory sticker
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "Cabinet Factory No.18"
- fran604g
- Victor VI
- Posts: 3988
- Joined: Mon Mar 04, 2013 2:22 pm
- Personal Text: I'm Feeling Cranky
- Location: Hemlock, NY
Re: Edisonic and Long Playing Consoles Survey
Great! Thank you, John, I'll add the data to my spreadsheet.
Best,
Fean
Best,
Fean
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
- fran604g
- Victor VI
- Posts: 3988
- Joined: Mon Mar 04, 2013 2:22 pm
- Personal Text: I'm Feeling Cranky
- Location: Hemlock, NY
Re: Edisonic and Long Playing Consoles Survey
In the spirit of coaxing others to participate in the survey, I thought I should post here a picture of my now completed 1-C. It was discovered languishing in the basement of a home in which an estate sale had been conducted. Through the alert of one of our members (Edisone), I managed to track it down; my son and daughter-in-law were kind enough to pick it up for me and go out of their way to deliver it to me -- a round trip of about 120 miles.
I replaced the grille material with an accurate reproduction of my own undertaking, and I'm especially pleased for the way everything eventually turned out.
Best,
Fran
I replaced the grille material with an accurate reproduction of my own undertaking, and I'm especially pleased for the way everything eventually turned out.
Best,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.
- phonogfp
- Victor Monarch Special
- Posts: 7384
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Edisonic and Long Playing Consoles Survey
I saw this poor little guy before Fran's restoration, and I'd never know it was the same machine! A nice save, Fran.
George P.
George P.
- alang
- VTLA
- Posts: 3109
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
Re: Edisonic and Long Playing Consoles Survey
It's a real beauty. Congratulations!
Andreas
Andreas