Count me in. I'll buy one. Hopefully it's a good title, and not something boring. Maybe Uncle Josh, Billy Murray, Ada Jones, etc? It sounds like a worthwhile project.
Harvey Kravitz
Columbia 20th Century 6'' long 3-minute cylinder records
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
-
- Victor Jr
- Posts: 8
- Joined: Fri Apr 08, 2011 9:07 am
Re: Columbia 20th Century 6'' long 3-minute cylinder records
Sign me up for one record! I vote for a brass band or hot jass! Thanks, Terry
- Wolfe
- Victor V
- Posts: 2755
- Joined: Wed Jan 07, 2009 6:52 pm
Re: Columbia 20th Century 6'' long 3-minute cylinder records
^ But they're looking for music suggestions around three minutes in length. If it was jazz a three minute selection would have to be copied from a shellac disc, right ? Maybe Norman already does that, I dunno.
I like the boxes of those cylinders. I didn't know that Columbia used the "Banner" on their cylinder boxes.
I like the boxes of those cylinders. I didn't know that Columbia used the "Banner" on their cylinder boxes.
- PeterF
- Victor IV
- Posts: 1914
- Joined: Sun Jul 08, 2012 1:06 pm
Re: Columbia 20th Century 6'' long 3-minute cylinder records
It can absolutely be copied from a disc or cylinder - he wants a raw digital source. So the challenge is to find an awesome number no longer than 3 minutes in length. Suggestions?
- PeterF
- Victor IV
- Posts: 1914
- Joined: Sun Jul 08, 2012 1:06 pm
Re: Columbia 20th Century 6'' long 3-minute cylinder records
I think I have the answer...just pulled out my old multi-LP set of the compiled works of Bix. They give the duration of each selection, on the sleeve. A quick scan shows that there are many with a duration of 3:00 or less.
One that pops out at me is Barnacle Bill The Sailor - Hoagy Carmichael with Bix - timing in at 2:51:
https://www.youtube.com/watch?v=wts5r4QLgig
But also worthy is Bix with the Wolverines, doing "Big Boy" with Bix soloing on both cornet and piano, at 2:47:
https://www.youtube.com/watch?v=W5ZD2wWEGlY
...and any number of others.
One that pops out at me is Barnacle Bill The Sailor - Hoagy Carmichael with Bix - timing in at 2:51:
https://www.youtube.com/watch?v=wts5r4QLgig
But also worthy is Bix with the Wolverines, doing "Big Boy" with Bix soloing on both cornet and piano, at 2:47:
https://www.youtube.com/watch?v=W5ZD2wWEGlY
...and any number of others.
-
- Victor V
- Posts: 2694
- Joined: Fri Nov 18, 2011 11:23 pm
- Location: NW Indiana VV-IV;
Re: Columbia 20th Century 6'' long 3-minute cylinder records
This sounds like a wonderful idea for those that own the machines that can play Columbia 20th Century 6" cylinders. I do not own one of these machines and probably never will due to pricing, but another reason was the lack of cylinders for them.
This fills a void and hopefully one day there will be a nice selection of recordings that can be had for these machines. I believe Vulcan has one title out that will fit these machines.
All the best on the project!
Jerry P.
This fills a void and hopefully one day there will be a nice selection of recordings that can be had for these machines. I believe Vulcan has one title out that will fit these machines.
All the best on the project!
Jerry P.
-
- Victor III
- Posts: 719
- Joined: Sun Dec 28, 2014 5:43 pm
Re: Columbia 20th Century 6'' long 3-minute cylinder records
Bix Bix Bix, At The Jazz Band Ball or Since My Best Girl Turned Me Down Bix Bix!!
- edisonphonoworks
- Victor IV
- Posts: 1566
- Joined: Wed Oct 21, 2009 10:50 am
- Personal Text: A new blank with authentic formula and spiral core!
- Contact:
Re: Columbia 20th Century 6'' long 3-minute cylinder records
I know Paul Morris made some cut black wax 20th centuries, that looked fantastic, about 15 years ago. My mold will make 6" long blanks, but I have no machines that play or record 20th century cylinders. If someone has a machine I can make the metallic soap blanks for you to record on. I have also thought about make a recording machine out of an Ediphone shaver, as a triple spring motor could be mounted below, and a 97 ⅓ (98,99) feed screw made for it, and on the mandrel an 8 tooth for four minute and 16 tooth for two minute gear made, and it would then record masters for the 20th century cylinders, and these masters could be electrically recorded and sent to Vulcan for processing into moulded records, he gave me the particulars, of making a master cylinder for his process. My mold is 6 ½" long, and the mandrel 7" long. Just a thought, I wish I had more time to work on cylinders If anyone wants to they can come here with a machine like a BF and experiment recording masters if they like. Just contact me northamericanphono@gmail.com. Or call (815) 876-6897 after 3pm. (I work from 7am-3pm 6 days a week manufacturing AR 15 and M 16 rifles. )
-
- Victor IV
- Posts: 1570
- Joined: Mon Mar 04, 2013 3:33 pm
Re: Columbia 20th Century 6'' long 3-minute cylinder records
The majority of Columbia Graphophones that played the 6 inch size was limited.Certainly Edison was NOT going to adapt his machines for a rival product!Imagine if there was a 6 inch cylinder using the 4 minute groove! edisonplayer
- Lucius1958
- Victor VI
- Posts: 3936
- Joined: Tue Dec 14, 2010 12:17 am
- Location: Where there's "hamburger ALL OVER the highway"...
Re: Columbia 20th Century 6'' long 3-minute cylinder records
Well, I did recently get a recorder for my BF...edisonphonoworks wrote:I know Paul Morris made some cut black wax 20th centuries, that looked fantastic, about 15 years ago. My mold will make 6" long blanks, but I have no machines that play or record 20th century cylinders. If someone has a machine I can make the metallic soap blanks for you to record on. I have also thought about make a recording machine out of an Ediphone shaver, as a triple spring motor could be mounted below, and a 97 ⅓ (98,99) feed screw made for it, and on the mandrel an 8 tooth for four minute and 16 tooth for two minute gear made, and it would then record masters for the 20th century cylinders, and these masters could be electrically recorded and sent to Vulcan for processing into moulded records, he gave me the particulars, of making a master cylinder for his process. My mold is 6 ½" long, and the mandrel 7" long. Just a thought, I wish I had more time to work on cylinders If anyone wants to they can come here with a machine like a BF and experiment recording masters if they like. Just contact me northamericanphono@gmail.com. Or call (815) 876-6897 after 3pm. (I work from 7am-3pm 6 days a week manufacturing AR 15 and M 16 rifles. )
Bill