My First Modern Turntable - Brunswick Charleston Video
- Swing Band Heaven
- Victor III
- Posts: 554
- Joined: Thu Jul 22, 2010 2:16 pm
Re: My First Modern Turntable - Brunswick Charleston Video
I think it's very impressive how well it has turned out.
- WDC
- Victor IV
- Posts: 1015
- Joined: Thu Jan 08, 2009 5:07 am
Re: My First Modern Turntable - Brunswick Charleston Video
That's a really nice turntable. I have had mine in the US for about four years now and it has been very reliable.
And a nice musical selection too!
And a nice musical selection too!
- Wolfe
- Victor V
- Posts: 2755
- Joined: Wed Jan 07, 2009 6:52 pm
Re: My First Modern Turntable - Brunswick Charleston Video
The wow and flutter spec on that 'table isn't the greatest, I think I read it was 0.13 % But it may not be so much of an issue when playing at 78 rpm.
- WDC
- Victor IV
- Posts: 1015
- Joined: Thu Jan 08, 2009 5:07 am
Re: My First Modern Turntable - Brunswick Charleston Video
Yes, the WRMS is rated at < 0.2% but with 78's that no problem and even with most LP's you won't likely hear that either. The AT turntable is otherwise very affordable, especially for a direct drive.
- bart1927
- Victor II
- Posts: 446
- Joined: Wed Jan 07, 2009 4:07 pm
- Location: Netherlands
Re: My First Modern Turntable - Brunswick Charleston Video
I've read some less than favourable reviews of the AT 120 USB. The sound quality is good, but there are some other issues. The anti skating doesn't seem to be doing a whole lot, and the arm lift dampening stops within a year, after which the tone arm will just drop like a bomb on the record.WDC wrote:That's a really nice turntable. I have had mine in the US for about four years now and it has been very reliable.
And a nice musical selection too!
I've never owned this AT, but I've had an Esoteric Sound CVS 14 since 2004, and I experienced these exact same issues. Not surprising, since they're both manufactured in China, by Hanpin. The Esoteric Sound is basically the same player as the Audio Technica, except it has a vertical/lateral switch and it lacks the internal preamp. Also, it costs twice as much.
-
- Victor III
- Posts: 904
- Joined: Thu May 26, 2016 3:46 pm
- Location: Philadelphia, PA
Re: My First Modern Turntable - Brunswick Charleston Video
Being my first electric machine, I'm not sure how the anti-skate is suppose to work, but set all the way one way or the other has zero effect. So far this is my only complaint, and it's possible I just don't know what it's supposed to do.bart1927 wrote:
The anti skating doesn't seem to be doing a whole lot, and the arm lift dampening stops within a year, after which the tone arm will just drop like a bomb on the record.
As for the tone arm lift, it works great now, we'll see in another year or so.
Wilson Records Facebook Page
https://www.facebook.com/donwilsonrecords
YouTube Channel
https://www.youtube.com/donwilsonlabs
https://www.facebook.com/donwilsonrecords
YouTube Channel
https://www.youtube.com/donwilsonlabs
- bart1927
- Victor II
- Posts: 446
- Joined: Wed Jan 07, 2009 4:07 pm
- Location: Netherlands
Re: My First Modern Turntable - Brunswick Charleston Video
The turning of the platter pulls the tone-arm inwards, so an equal and opposite counterforce is needed to keep the stylus in the middle of the groove. The anti-skating function provides that counterforce.donniej wrote:Being my first electric machine, I'm not sure how the anti-skate is suppose to work, but set all the way one way or the other has zero effect. So far this is my only complaint, and it's possible I just don't know what it's supposed to do.bart1927 wrote:
The anti skating doesn't seem to be doing a whole lot, and the arm lift dampening stops within a year, after which the tone arm will just drop like a bomb on the record.
As for the tone arm lift, it works great now, we'll see in another year or so.
- Wolfe
- Victor V
- Posts: 2755
- Joined: Wed Jan 07, 2009 6:52 pm
Re: My First Modern Turntable - Brunswick Charleston Video
bart1927 wrote: the AT 120 USB. The sound quality is good, but there are some other issues.
What is the base / plinth of this 'table made from ? Is it all plastic ? Or is the bottom half plastic with something else on top, like aluminum, or vice versa ?
The built in preamp has been a complaint of some. Apparently the 'table sounds better with that preamp removed. There are online tutorials for that. But doing so would void your warranty, I'm sure.
- bart1927
- Victor II
- Posts: 446
- Joined: Wed Jan 07, 2009 4:07 pm
- Location: Netherlands
Re: My First Modern Turntable - Brunswick Charleston Video
It's all plastic. But it has a heavy metal plate inside to reduce unwanted vibrations, and I believe it also acts as a ground.Wolfe wrote:bart1927 wrote: the AT 120 USB. The sound quality is good, but there are some other issues.
What is the base / plinth of this 'table made from ? Is it all plastic ? Or is the bottom half plastic with something else on top, like aluminum, or vice versa ?
The built in preamp has been a complaint of some. Apparently the 'table sounds better with that preamp removed. There are online tutorials for that. But doing so would void your warranty, I'm sure.
- Wolfe
- Victor V
- Posts: 2755
- Joined: Wed Jan 07, 2009 6:52 pm
Re: My First Modern Turntable - Brunswick Charleston Video
Now I remember where I got the wow & flutter spec of 0.13 % - it was the turntable that bart1927 has, the CVS 14.WDC wrote:Yes, the WRMS is rated at < 0.2% but with 78's that no problem and even with most LP's you won't likely hear that either. The AT turntable is otherwise very affordable, especially for a direct drive.
http://www.esotericsound.com/turntable_ ... 20Spec.htm
Yet the AT 120 USB has it at 0.2 %. Curiously. It would seem as if they have the same motor.
Don't want to make too much if it, though, it's not really the subject of the thread.