Still in search of a 15" soldered seam all brass horn. Can have oxidation, cracks, pitting, and dents, just not severely crushed.
Let me know what you might have!
-Jake
WANTED: Original 15" All Brass Horn
- long_island_phono
- Victor II
- Posts: 394
- Joined: Fri Jan 04, 2013 1:58 am
WANTED: Original 15" All Brass Horn
Last edited by long_island_phono on Wed Jan 10, 2018 10:56 pm, edited 1 time in total.
- Crank_it_up
- Victor III
- Posts: 586
- Joined: Thu May 01, 2014 8:34 pm
- Location: South Florida
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: WANTED: Original 15" All Brass Horn
Does the horn require a hanger for a small crane? Do you need a straight nipple, or a bent one? There are many variations to these horns.
Harvey Kravitz
Harvey Kravitz
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
Re: WANTED: Original 15" All Brass Horn
Just curious Jake on what machine you would put this horn?
Will a 15 inch all brass horn travel on an early Home or Triumph carriage or what where they intended for?
Will a 15 inch all brass horn travel on an early Home or Triumph carriage or what where they intended for?
- long_island_phono
- Victor II
- Posts: 394
- Joined: Fri Jan 04, 2013 1:58 am
Re: WANTED: Original 15" All Brass Horn
I am working on a "⅚ out of 10" Graphophone BS and it is a build up for someone, not a restoration, hence the horn can have issues. Due to the difficulty in finding the thicker brass or nickel plated coin op horns, and given the ok condition, we have settled for using at least a period-correct soldered seam horn. I'd rather get a crusty non hanging tab horn so I don't have to wreck a good hanging horn.
-Jake
-Jake
- long_island_phono
- Victor II
- Posts: 394
- Joined: Fri Jan 04, 2013 1:58 am
Re: WANTED: Original 15" All Brass Horn
Still in search of a soldered seam horn, any condition will do so long as it's all there!
-Jake
-Jake
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: Original 15" All Brass Horn
Jake, It hasn't been crushed and it's mostly there. What am I offered?
Jerry Blais
Jerry Blais
- gramophone-georg
- Victor VI
- Posts: 3995
- Joined: Mon Jan 20, 2014 11:55 pm
- Personal Text: Northwest Of Normal
- Location: Eugene/ Springfield Oregon USA
Re: WANTED: Original 15" All Brass Horn
Holy Toledo. It's an ultra rare BS diffusor horn... in brass!
"He who dies with the most shellac wins"- some nutty record geek
I got PTSD from Peter F's avatar
I got PTSD from Peter F's avatar
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: WANTED: Original 15" All Brass Horn
Hey Jerry, how much will you offer to pay Jake take that horn off your hands??? Seriously, it might be fixable, but a lot of work.
Harvey Kravitz
Harvey Kravitz
- long_island_phono
- Victor II
- Posts: 394
- Joined: Fri Jan 04, 2013 1:58 am
Re: WANTED: Original 15" All Brass Horn
I'll take it!Jerry B. wrote:Jake, It hasn't been crushed and it's mostly there. What am I offered?
Jerry Blais