Cleaning the turntable felt
- De Soto Frank
- Victor V
- Posts: 2687
- Joined: Wed Dec 01, 2010 1:27 pm
- Location: Northeast Pennsylvania
- alang
- VTLA
- Posts: 3115
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
Re: Cleaning the turntable felt
It has not for me so far. Not sure what type of glue they used back then?De Soto Frank wrote:I guess the bath doesn't affect the glue ?
Andreas
- Curt A
- Victor Monarch Special
- Posts: 6429
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
Re: Cleaning the turntable felt
I think that leaving it attached is the key to this... I had a loose 10" felt and decided to wash it in a similar fashion (without being attached to the platter), when it dried it was an 8" felt...alang wrote:You have to wash it while affixed to the platter, otherwise the felt will shrink and/or get out of form. You'll never get it back on the way it was. Been there, done that. The platter is steel and as long as you don't let it sit in the water for weeks it won't do any damage. I mean, you wash your car as well without hurting it.New Yorker wrote:^ Wait... do you do the above with the old felt still affixed to the platter? Wouldn't the water damage the platter? Thanks.
Andreas
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
- Lucius1958
- Victor VI
- Posts: 3935
- Joined: Tue Dec 14, 2010 12:17 am
- Location: Where there's "hamburger ALL OVER the highway"...
Re: Cleaning the turntable felt
I have read of burnt shellac being used as an adhesive.alang wrote:It has not for me so far. Not sure what type of glue they used back then?De Soto Frank wrote:I guess the bath doesn't affect the glue ?
Andreas
Bill
- Marco Gilardetti
- Victor IV
- Posts: 1398
- Joined: Thu Feb 24, 2011 3:19 am
- Personal Text: F. Depero, "Grammofono", 1923.
- Location: Italy
- Contact:
Re: Cleaning the turntable felt
I also learned it "the hard way". I ended up with a small oval snippet of felt, good perhaps as a pot holder. Fortunately replacement felts are readily available.alang wrote:You have to wash it while affixed to the platter, otherwise the felt will shrink and/or get out of form.
- oldphonographsteve
- Victor II
- Posts: 372
- Joined: Mon Dec 03, 2012 5:45 pm
- Personal Text: I'm the guy that found the fault in asphalt
- Location: Connecticut
- Contact:
Re: Cleaning the turntable felt
This may sound a bit tedious, but if the felt is clean overall but has some specks of lint or the like I have used tweezers to individually pluck the lint from the surface. It takes patience and a steady hand but the results make it worth doing after the removal of a couple dozen specks of lint.
-Stephen
-Stephen
-
- Victor Monarch Special
- Posts: 5334
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Cleaning the turntable felt
I always assumed "Energine" was benzene, a carcinogen, which I used anyway.HisMastersVoice wrote:Another method I have used to clean heavy staining (especially grease/oil) is Naptha. This is commonly available as Ronsonol or Zippo lighter fluid. Simply wet a rag with it (outside) and blot the stain. You can also soak the area of felt and carefully use a stiff brush to lift harder stains. Naptha evaporates completely with no residue, even on paper. A long time ago there used to be a laundry product called "Energine" which was used for spot removal on clothing. Surprise...it was 100% Naptha. See also: Fels-Naptha laundry soap (which sadly no longer contains Naptha because solvents are evil and therefore we can't have nice things.)
That's funny!HisMastersVoice wrote:which sadly no longer contains Naptha because solvents are evil and therefore we can't have nice things.
- rvwenger
- Victor I
- Posts: 179
- Joined: Mon Jun 22, 2015 8:40 pm
- Location: South Bend, Indiana
Re: Cleaning the turntable felt
Thanks for the tips Sean. I followed your directions and they cleaned up great. It's nice to keep the original if at all possible. It's only original once.
I do have a IV that i'll leave alone trying to preserve the patina.
I do have a IV that i'll leave alone trying to preserve the patina.
- rvwenger
- Victor I
- Posts: 179
- Joined: Mon Jun 22, 2015 8:40 pm
- Location: South Bend, Indiana
- Curt A
- Victor Monarch Special
- Posts: 6429
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
Re: Cleaning the turntable felt
I learned that lesson when I washed a 10" felt and it turned into an 8" one...alang wrote:You have to wash it while affixed to the platter, otherwise the felt will shrink and/or get out of form. You'll never get it back on the way it was. Been there, done that. The platter is steel and as long as you don't let it sit in the water for weeks it won't do any damage. I mean, you wash your car as well without hurting it.New Yorker wrote:^ Wait... do you do the above with the old felt still affixed to the platter? Wouldn't the water damage the platter? Thanks.
Andreas
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife