It is possible that you could write me a pm? How did you nickle plate your pieces at home?walser wrote:Hi Billehifi
I'm sure your phonograph is not a Pathé. It looks similar and the design shares the same general concept and maybe even shares some dimensions as the reproducer socket. I'm also following your restoration and I like very much your approach of how you are doing it.
BTW, I Nickel plated my first piece this last week end. I think you need to nickel plate all your pieces to prevent them from rusting again. It's a fairly easy process that can be done at home.
Regards,
Pedro Martínez
Pathé Coquet in need of lots of love
-
- Victor Jr
- Posts: 17
- Joined: Tue Mar 14, 2017 11:00 am
- Location: Denmark
Re: Pathé Coquet in need of lots of love
-
- Victor II
- Posts: 257
- Joined: Sat Apr 21, 2012 6:33 am
- Location: France
Re: Pathé Coquet in need of lots of love
Hi, although I don't have this model, it rang a bell so we looked through our documentation and my wife did find something similar on Jean-Paul Agnard web site...JerryVan wrote: I have a Model "A" style, but in a very simple box, finished in a green leatherette. No sign that I can see there having been a lid either. Have you seen such a model?
As the direct link to this page does not work, if you want to see it, go to http://www.webring.org/l/rd?ring=phonog ... tion%2Ehtm select other French machines then Girard and look at the very first one called “XX siècle”. It's difficult to see if it's a nickel plated machine or a black one.
Could you check if a salon mandrel fits on your machine?
Jeff
- walser
- Victor II
- Posts: 210
- Joined: Wed Jul 30, 2014 9:34 am
- Location: Spain
- Contact:
Re: Pathé Coquet in need of lots of love
Hi,Billehifi wrote:It is possible that you could write me a pm? How did you nickle plate your pieces at home?walser wrote:Hi Billehifi
I'm sure your phonograph is not a Pathé. It looks similar and the design shares the same general concept and maybe even shares some dimensions as the reproducer socket. I'm also following your restoration and I like very much your approach of how you are doing it.
BTW, I Nickel plated my first piece this last week end. I think you need to nickel plate all your pieces to prevent them from rusting again. It's a fairly easy process that can be done at home.
Regards,
Pedro Martínez
I followed this very instructive thread: http://forum.talkingmachine.info/viewto ... =7&t=27955
I sourced my nickel from ebay and I use titanium rods to attach the anodes because they don't contaminate the Nickel acetate solution.
Regards,
Pedro Martínez
-
- Victor Monarch Special
- Posts: 5346
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Pathé Coquet in need of lots of love
phonodesbois wrote:Hi, although I don't have this model, it rang a bell so we looked through our documentation and my wife did find something similar on Jean-Paul Agnard web site...JerryVan wrote: I have a Model "A" style, but in a very simple box, finished in a green leatherette. No sign that I can see there having been a lid either. Have you seen such a model?
As the direct link to this page does not work, if you want to see it, go to http://www.webring.org/l/rd?ring=phonog ... tion%2Ehtm select other French machines then Girard and look at the very first one called “XX siècle”. It's difficult to see if it's a nickel plated machine or a black one.
Could you check if a salon mandrel fits on your machine?
Jeff
Jeff,
That's it! I don't believe a salon mandrel would fit on my machine. Interesting to see that there was a lid. As Jean-Paul mentions, there is no evidence of a latch for the lid, hence my thinking there never was one. Thanks!
- walser
- Victor II
- Posts: 210
- Joined: Wed Jul 30, 2014 9:34 am
- Location: Spain
- Contact:
Re: Pathé Coquet in need of lots of love
Here are my reproducer and recorder finished. I've nickel plated the connectors. It took me several attempts to end up with a finish that its neither too dull or too shiny in order to blend them to the rest of the pieces.
Regards,
Pedro Martínez
If you want connectors please send me a message. I've found that the shank of the reproducers size vary slightly so I think that the best option is to send me the reproducer and I will return it with the connector fitted. I can make them also with an almost mirror like finish.Regards,
Pedro Martínez