Parts needed for Orthophonic portable Victrola
Record container
Lid support
Are these readily available or should I pass on a machine missing these?
WANTED: Parts wanted for VV 2-35 or 2-55
-
- Victor Jr
- Posts: 29
- Joined: Sun Sep 24, 2017 3:53 pm
-
- Victor Monarch Special
- Posts: 5369
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Correction - Parts wanted for VV 2-35 or 2-55
Record container for a 2-35: https://www.ebay.com/itm/Vintage-Victor ... SwA3dYk2Or
The seller has just about all the pieces of a 2-35 cabinet, but I see no lid support. You might ask.
The seller has just about all the pieces of a 2-35 cabinet, but I see no lid support. You might ask.
-
- Victor V
- Posts: 2186
- Joined: Sat Jul 09, 2016 7:12 pm
Re: Correction - Parts wanted for VV 2-35 or 2-55
That's from a VV-35 ( http://www.victor-victrola.com/35.htm )JerryVan wrote:Record container for a 2-35: https://www.ebay.com/itm/Vintage-Victor ... SwA3dYk2Or
The seller has just about all the pieces of a 2-35 cabinet, but I see no lid support. You might ask.
The VV-2-35 has a green painted metal record holder, with the lid support soldered to it, as shown in the illustration on this page -- http://www.victor-victrola.com/2-35.htm
OrthoFan
-
- Victor Monarch Special
- Posts: 5369
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Correction - Parts wanted for VV 2-35 or 2-55
OrthoFan wrote:That's from a VV-35 ( http://www.victor-victrola.com/35.htm )JerryVan wrote:Record container for a 2-35: https://www.ebay.com/itm/Vintage-Victor ... SwA3dYk2Or
The seller has just about all the pieces of a 2-35 cabinet, but I see no lid support. You might ask.
The VV-2-35 has a green painted metal record holder, with the lid support soldered to it, as shown in the illustration on this page -- http://www.victor-victrola.com/2-35.htm
OrthoFan
Oops! You're correct of course. I thought the seller's description was his shorthand way of saying 2-35. Thanks for bringing that up! I should have thought through that a little more.