New amberola 30 project

Discussions on Talking Machines & Accessories
User avatar
NEFaurora
Victor IV
Posts: 1201
Joined: Sat Feb 20, 2010 7:02 pm
Personal Text: "A Phonograph in every home..."
Location: Melbourne, FL (Former New Yorker!)

Re: New amberola 30 project

Post by NEFaurora »

I think that the Bedplate/Motor might be a 2nd Series Bedplate Motor in a 1st Series Wood Case...

We need more pics of the Bedplate and Left side of the machine to be able to tell..

Tony K.

Edison Collector/Restorer

:)

User avatar
Mormon S
Victor III
Posts: 737
Joined: Mon May 07, 2018 6:27 pm
Personal Text:     Martin     "phono_fluff" on instagram

Re: New amberola 30 project

Post by Mormon S »

Sorry for the florencently lit photo, but here you go.

Also, I fully intend to keep every part of this machine (thank you Jerry for the offer)

Martin
Attachments
20190418_225023.jpg
20190418_224539.jpg
20190418_224524.jpg

User avatar
NEFaurora
Victor IV
Posts: 1201
Joined: Sat Feb 20, 2010 7:02 pm
Personal Text: "A Phonograph in every home..."
Location: Melbourne, FL (Former New Yorker!)

Re: New amberola 30 project

Post by NEFaurora »

Yeah, I think my last assumption was correct.. It looks like it's a Mix-Match of Series 1 Bedplate, Motor and and some Series 2 Parts in a Series 1 Case. The Reproducer is a Series 2 / Series 3 Reproducer among other things.


Tony K.

Edison Collector/Restorer

:)
Last edited by NEFaurora on Fri Apr 19, 2019 12:03 am, edited 1 time in total.

User avatar
Mormon S
Victor III
Posts: 737
Joined: Mon May 07, 2018 6:27 pm
Personal Text:     Martin     "phono_fluff" on instagram

Re: New amberola 30 project

Post by Mormon S »

I was very surprised when I opened the spring barell. I have never seen anything like this, someone made the shaft much thicker, and also "repaired" the spring.
Attachments
20190418_234849.jpg
20190418_234839.jpg
Last edited by Mormon S on Fri Apr 19, 2019 12:14 am, edited 1 time in total.

User avatar
NEFaurora
Victor IV
Posts: 1201
Joined: Sat Feb 20, 2010 7:02 pm
Personal Text: "A Phonograph in every home..."
Location: Melbourne, FL (Former New Yorker!)

Re: New amberola 30 project

Post by NEFaurora »

How about a pic of the Dataplate, and a pic of the top of the Black Governor cover...

That will help as well.

I noticed that the horn is a Late Series 1 Horn, But the Holder/Pivot Point for the horn is homemade!

The Homemade winder assembly looks interesting! Post more pics!

Someone apparently did some "Freestyling" repairs on this thing...


Tony K.

Edison Collector/Restorer

:)

User avatar
Mormon S
Victor III
Posts: 737
Joined: Mon May 07, 2018 6:27 pm
Personal Text:     Martin     "phono_fluff" on instagram

Re: New amberola 30 project

Post by Mormon S »

Here's the picture of the data plate and governor cover, and of course theres no external speed control or hole for it, as I've stated earlier on the thread.

Martin
Attachments
20190419_001115.jpg
20190419_001028.jpg

User avatar
NEFaurora
Victor IV
Posts: 1201
Joined: Sat Feb 20, 2010 7:02 pm
Personal Text: "A Phonograph in every home..."
Location: Melbourne, FL (Former New Yorker!)

Re: New amberola 30 project

Post by NEFaurora »

Yeah, That's a Series 1 Dataplate.. That Governor Cover is a Series 2 Governor Cover though. A Series 1 Governor cover has the hole for external Speed Adjuster. Your machine correctly came with a Nickeled Reproducer for sure Originally. The Bedplate seems to be a Series 1 Bedplate as it has the early Countersunk Screwholes. Don't know about some of the other Motor parts as I can't see them..

What are your plans for the machine??

Here are some Series 1 Bedplates w/Motors on ebay that could save you some time and money on the restoration... I think that they are both the same item... Seller is well known (Mark)...Croakinfrog..

https://www.ebay.com/itm/EDISON-AMBEROL ... 2518321183

and...

https://www.ebay.com/itm/EDISON-AMBEROL ... 2556225652


Here is the correct Governor cover..

https://www.ebay.com/itm/EARLY-EDISON-P ... 2622828573


Here is the correct Speed Control Knob...

https://www.ebay.com/itm/EDISON-AMBEROL ... 2655802873


Here is the correct Nickeled Reproducer..

https://www.ebay.com/itm/Original-Ediso ... 3184849963


All the parts are sold by the same seller (Croakinfrog) who is Mark Geiser.


Tony K.

Edison Collector/Restorer

:)

User avatar
Mormon S
Victor III
Posts: 737
Joined: Mon May 07, 2018 6:27 pm
Personal Text:     Martin     "phono_fluff" on instagram

Re: New amberola 30 project

Post by Mormon S »

NEFaurora wrote:Yeah, That's a Series 1 Dataplate.. That Governor Cover is a Series 2 Governor Cover though. A Series 1 Governor cover has the hole for external Speed Adjuster. Your machine correctly came with a Nickeled Reproducer for sure Originally. The Bedplate seems to be a Series 1 Bedplate as it has the early Countersunk Screwholes. Don't know about some of the other Motor parts as I can't see them..

What are your plans for the machine??

Here are some Series 1 Bedplates w/Motors on ebay that could save you some time and money on the restoration... I think that they are both the same item... Seller is well known (Mark)...Croakinfrog..

https://www.ebay.com/itm/EDISON-AMBEROL ... 2518321183

and...

https://www.ebay.com/itm/EDISON-AMBEROL ... 2556225652


Here is the correct Governor cover..

https://www.ebay.com/itm/EARLY-EDISON-P ... 2622828573


Here is the correct Speed Control Knob...

https://www.ebay.com/itm/EDISON-AMBEROL ... 2655802873


Here is the correct Nickeled Reproducer..

https://www.ebay.com/itm/Original-Ediso ... 3184849963


All the parts are sold by the same seller (Croakinfrog) who is Mark Geiser.


Tony K.

Edison Collector/Restorer

:)
While I appreciate you're enthusiasm, I think our methods of approach are far apart. I'm well aware of all of the issues it has, but I will do my best with what I have. This is just a "for fun" project, an amberola 30, something I can experiment new things on and divert from the typical routine I take in a restoration. I'm going to keep all of these parts together and not worry about the fact that they got jumbled up at some point.

Martin

User avatar
NEFaurora
Victor IV
Posts: 1201
Joined: Sat Feb 20, 2010 7:02 pm
Personal Text: "A Phonograph in every home..."
Location: Melbourne, FL (Former New Yorker!)

Re: New amberola 30 project

Post by NEFaurora »

I look forward to seeing what you do with it... Keep posting pics as you work on it...

I have the popcorn ready..



Tony K.

Edison Collector/Restorer

:)

tesch1932
Victor I
Posts: 100
Joined: Sat Apr 07, 2018 9:15 am
Personal Text: I'm Steve

Re: New amberola 30 project

Post by tesch1932 »

Awesome!

I just picked up an Amberola 30 in very poor shape as well. Probably won't get around to it until July or so.

Look forward to following!

Post Reply