What are the 2 small holes for on the needle holder.

Discussions on Talking Machines & Accessories
oldtvsandtoys
Victor II
Posts: 275
Joined: Thu Nov 19, 2009 9:12 pm
Personal Text: Nyuk Nyuk Nyuk.........Why Soitenly
Location: Clinton Twp., Michigan

What are the 2 small holes for on the needle holder.

Post by oldtvsandtoys »

Ok might be a dumb question but what are the 2 small holes on the ends for?
Attachments
IMG_5372.JPG
IMG_5372.JPG (138.31 KiB) Viewed 1269 times

Phonofreak
Victor VI
Posts: 3719
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: What are the 2 small holes for on the needle holder.

Post by Phonofreak »

I heard the holes or dimples would hold the little plugs when unpacking the machine. Anybody else know?
Harvey Kravitz

User avatar
Roaring20s
Victor V
Posts: 2562
Joined: Wed Jun 13, 2012 1:55 am
Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
Location: Tucson, AZ

Re: What are the 2 small holes for on the needle holder.

Post by Roaring20s »

Perhaps the larger were for loud and soft Steel needles, and the smaller for loud and soft Bamboo needles?
Why smaller receptacles for Bamboo? Since they get repointed, less would be needed.
No facts here, just thinking aloud. :coffee:

James.

User avatar
Django
Victor IV
Posts: 1693
Joined: Thu Apr 13, 2017 7:31 pm
Location: New Hampshire’s West Coast

Re: What are the 2 small holes for on the needle holder.

Post by Django »

This was discussed in the past. The plug suggestion was put forward, but debunked. No resolution was reached. They may be a place to put the motor board screws when you have the hood up. We may never know, but it is a good question.

EarlH
Victor III
Posts: 816
Joined: Thu Sep 25, 2014 4:25 pm
Location: North Central Iowa

Re: What are the 2 small holes for on the needle holder.

Post by EarlH »

Those holes are in the early Pooley machines when Victor was still using the round hole exhibition reproducer, so I doubt they were thinking about bamboo needles just yet. And then later on, they stopped making holders with those extra holes. So who knows. And those early Pooley machines didn't use motor-board screws right away either, the motor just sits down in there and the corner brackets on the underside of the motor-board kind of hold it in place. I was told years ago that they were for those plugs on the back of the cabinet as well, but those things really don't fit in there either and the Pooley cabinet also does not have screw holes in the back for those plugs.

User avatar
Django
Victor IV
Posts: 1693
Joined: Thu Apr 13, 2017 7:31 pm
Location: New Hampshire’s West Coast

Re: What are the 2 small holes for on the needle holder.

Post by Django »

Maybe they were put there so that people in the future would ask, what are those extra holes for?

JerryVan
Victor Monarch Special
Posts: 5321
Joined: Mon Aug 24, 2009 3:08 pm
Location: Southeast MI

Re: What are the 2 small holes for on the needle holder.

Post by JerryVan »

The tip of my index finger fits perfectly in those. Probably, that's what they're for!!

User avatar
gramophone-georg
Victor VI
Posts: 3992
Joined: Mon Jan 20, 2014 11:55 pm
Personal Text: Northwest Of Normal
Location: Eugene/ Springfield Oregon USA

Re: What are the 2 small holes for on the needle holder.

Post by gramophone-georg »

JerryVan wrote:The tip of my index finger fits perfectly in those. Probably, that's what they're for!!
Finger bowls on a Victrola? Who knew?
"He who dies with the most shellac wins"- some nutty record geek

I got PTSD from Peter F's avatar

HisMastersVoice
Auxetophone
Posts: 2587
Joined: Wed Jan 14, 2009 5:01 am

Re: What are the 2 small holes for on the needle holder.

Post by HisMastersVoice »

I’ve always wondered about this too. I agree, they can’t be for fibre needles since my VTLA was shipped with a round-hole exhibition.

Wood buttons for the back of the machine can be ruled out. They were shipped in the outfit box with the rest of the parts.
FFA80280-54C3-4D30-AAA6-4DD9F77D1926.jpeg

User avatar
Henry
Victor V
Posts: 2624
Joined: Thu Jan 08, 2009 11:01 am
Location: Allentown, Pennsylvania

Re: What are the 2 small holes for on the needle holder.

Post by Henry »

Django wrote:Maybe they were put there so that people in the future would ask, what are those extra holes for?
Ditto that. There are two kinds of people in the world: those who ask what those extra holes are for, and those who don't. ;)

Post Reply