For Sale: Victrola XVI "L" door parts - Various

[Ripduf1]

Hi, I recently acquired a Mahogany L door which had toppled over at some point in the last 100 Years and had many case breaks and extra screws trying to hold those breaks together, none to well. Most of the parts were present and in good condition once cleaned up.

I can bring these to the upcoming Wayne Show in October with no delivery charge if you see something you need to finish your machine and purchase. Otherwise all the prices below will need actual shipping to be added. Thanks for looking! Call email or PM with questions or to purchase. John Duffy 860-966-2827


XVI Data Tag with pins $15
Gold Crank Escutcheon good condition $25
Set of (5) Knobs $40
Accessory Drawer for "L" door $50

[Bluefish1257]

Hi, I recently acquired a Mahogany L door which had toppled over at some point in the last 100 Years and had many case breaks and extra screws trying to hold those breaks together, none to well. Most of the parts were present and in good condition once cleaned up.

I can bring these to the upcoming Union Show with no delivery charge if you see something you need to finish your machine and purchase. Otherwise all the prices below will need actual shipping to be added. Thanks for looking! Call email or PM with questions or to purchase. John Duffy 860-966-2827

Gold Bullet Brake Excellent condition $125
Gold Crank Escutcheon good condition $25
Gold Crank good condition $50
Gold Arm Very good condition $75
Gold Exhibition Excellent Condition $75
Set of (5) Knobs $40
Motor and Cast iron turntable (works well) $210
Speed Control $40
Internal Horn for "L" door $50
Accessory Drawer for "L" door $50

[Bluefish1257]

I will take the gold arm. PM sent.
Thank you. Ben

[CDBPDX]

Definitely need the horn, the reproducer, and the speed control. Shipping to 98611??

[Ripduf1]

Hi I added the Data Tag (stamped C over B!) and Casters which all turn, one is tight. Thanks John

[CDBPDX]

John, I received the reproducer (already rebuilt), the speed adjust assembly, and the horn, all in excellent condition! Thanks!

And thanks to Jerry B. for picking them up at Union for me!

Cliff

[c5fan]

Did the lower right front L-door survive in good shape? I have another project to complete. Thanks

[Ripduf1]

These doors did not survive. I do have a pair of doors from an L door that are pretty good. We should talk as they are not perfect. Call me at 860-966-2827 Thanks John Where are you located?

[c5fan]

Orlando, Florida. I bought the motor from you at Union.

[Ripduf1]

Hi Bob,
Sorry I can't keep up with everyone's "handle" on the forum with real names.

I sent you an email with pictures if you can use the doors I have.

John