Yes I do and I am very pleased about it. As said previously, as I can also find graphite paste locally, I mix 30% graphite and 70% moly grease. Pure graphite paste is very very thick and would be unusable in pure form as it would block the whole coils/barrel assembly rather than lubrify it, but it mixes perfectly with moly grease, which is as well grey/black by nature so also optically very similar to what was used back then.nostalgia wrote:Thanks also to Marco Gilardetti from suggesting Valvoline grease, have you used this yourself for springs?
But in any case, adding graphite is only for being philological and nostalgic as I'm sure that 100% moly grease would work perfectly just as well.
In your case I would perhaps mix 50% of that graphite spray (which is definitely not as thick as graphite paste) with 50% of moly grase. But, as said, adding graphite is an optional for us picky ones.