It's time for my annual post to ask the group if they have, or have knowledge of, a 12" (actually about 12 ½" ID) nickle-plated trim ring found on the larger outside horn Columbia machines. I have an otherwise perfect and original BD that is missing the ring. Yes, it originally had a ring - the holes are there.
For those of you in the same boat, I have tried to get Ron Sitko and some others in the hobby who have the skill & know-how to make reproduction rings, but to no avail. Start-up costs are too high and the perceived demand is low. I also investigated using clock bezels, but couldn't find any that come close. And no, the 12" rings from the Grafonola machines will not work - I tried.
Any ideas are appreciated. Thanks for your help.
Columbia Trim Ring
- DrGregC
- Victor I
- Posts: 116
- Joined: Fri Feb 20, 2009 6:47 pm
- Location: North Wales, PA
- OrthoSean
- Victor V
- Posts: 2912
- Joined: Thu Jan 08, 2009 1:33 pm
- Location: Near NY's Capital
Re: Columbia Trim Ring
Yup, that makes two of us, Greg (and we've talked about this before). My BD is missing the ring as well! A shame, too, because it's an otherwise super example.
Sean
Sean
-
- Victor Jr
- Posts: 2
- Joined: Sun Sep 12, 2010 10:11 am
Re: Columbia Trim Ring
I need one also for my BY. Could use the back mount, tone arm and elbow too. Thanks! Jon