I see where you're coming from, but the side gate was due to be town down anyhow, under the layers of paint it had quite severe wood rot, and was to be replaced along with several other house works happening over the last and next month, the next door neighbor very much keeps himself to himself and I can rarely get in touch with him so since it had to come down anyway, I just took the saw to it and it meant we could go straight through with it for ease, the bottom section I kept only for something for the door to close against in the following few daysJeffR1 wrote: ↑Fri Nov 12, 2021 4:56 pm This is ridiculous, if you didn't want to lift it over your garden gate Alex, then use the neighbors gate and maneuver the edge through first, rest it on the edge of the small fence the way you did on your window sill with the rubber matt _ you're through.
Maybe you and you neighbor don't get along or he was afraid of liability ???
I think there would have even been enough room to ease it in at angle once an edge got through, there was plenty of room in the alley to do that.
The worst thing that would have happened is that it would have not fit that way, you would not have damaged anything.
Carrying it straight through like you did made no sense.
This makes me think of Sesame Street when I was a kid.
There were these two guys trying to get a 2x4 through the door, rather then carrying it through length wise, they cut two gaping holes on either side of the door jamb to get it through.
The idea of the exercise back then was to get the kids to give instructions to somebody.
The things we do for gramophones!
- kirtley2012
- Victor IV
- Posts: 1580
- Joined: Sat Feb 11, 2012 3:10 pm
- Personal Text: Buyer of broken things
- Location: North Shields, UK
- Contact:
Re: The things we do for gramophones!
-
- Victor III
- Posts: 509
- Joined: Sat Jul 24, 2021 11:04 pm
- Location: British Columbia Vancouver Island Canada
Re: The things we do for gramophones!
Why didn't you just say that in the first place, I was getting worried about you...?kirtley2012 wrote: ↑Fri Nov 12, 2021 6:10 pmI see where you're coming from, but the side gate was due to be town down anyhow, under the layers of paint it had quite severe wood rot, and was to be replaced along with several other house works happening over the last and next month, the next door neighbor very much keeps himself to himself and I can rarely get in touch with him so since it had to come down anyway, I just took the saw to it and it meant we could go straight through with it for ease, the bottom section I kept only for something for the door to close against in the following few daysJeffR1 wrote: ↑Fri Nov 12, 2021 4:56 pm This is ridiculous, if you didn't want to lift it over your garden gate Alex, then use the neighbors gate and maneuver the edge through first, rest it on the edge of the small fence the way you did on your window sill with the rubber matt _ you're through.
Maybe you and you neighbor don't get along or he was afraid of liability ???
I think there would have even been enough room to ease it in at angle once an edge got through, there was plenty of room in the alley to do that.
The worst thing that would have happened is that it would have not fit that way, you would not have damaged anything.
Carrying it straight through like you did made no sense.
This makes me think of Sesame Street when I was a kid.
There were these two guys trying to get a 2x4 through the door, rather then carrying it through length wise, they cut two gaping holes on either side of the door jamb to get it through.
The idea of the exercise back then was to get the kids to give instructions to somebody.
Time to get to know your neighbour, if I'm being too presumptions, make him a plate of nice cookies or something.
- AZ*
- Victor IV
- Posts: 1143
- Joined: Thu Jan 15, 2009 8:51 pm
- Location: USA
Re: The things we do for gramophones!
Alex,
Congratulations on your acquisition. Enjoy it! (I am sure you will.)
Congratulations on your acquisition. Enjoy it! (I am sure you will.)
Best regards ... AZ*
- nostalgia
- Victor IV
- Posts: 1408
- Joined: Thu Jun 13, 2019 1:58 am
- Personal Text: Keep winding up
- Location: My gramophone repair room
Re: The things we do for gramophones!
Congratulations, Alex
What a wonderful machine. This is the kind of machine I will never find in my area of Europe, since they never were imported here.
What a wonderful machine. This is the kind of machine I will never find in my area of Europe, since they never were imported here.
-
- Victor IV
- Posts: 1847
- Joined: Sun Mar 15, 2009 6:18 am
- Location: Luxembourg
Re: The things we do for gramophones!
Congratulations, Alex, especially for getting the horn inside your room, quite impressive job and entertaining video! As you are aware, I reached my limit in terms of premium space, and moreover a machine like that would have to sit in the garage, as it would not pass neither door nor windows of my gramophone salon.
- BassetHoundTrio
- Victor I
- Posts: 115
- Joined: Sun Feb 12, 2017 11:07 am
- Location: Chicago, IL
- Contact:
Re: The things we do for gramophones!
Heartiest congratulations, Alex! An amazing machine, to be sure, and one without equal in terms of acoustic reproduction. I loved the video - worth the effort, I think, and it looks splendid in its new home. Cheers!
- Marco Gilardetti
- Victor IV
- Posts: 1398
- Joined: Thu Feb 24, 2011 3:19 am
- Personal Text: F. Depero, "Grammofono", 1923.
- Location: Italy
- Contact:
Re: The things we do for gramophones!
I'm so glad that this outstanding machine is in your hands, Alex. I know you will enjoy it as it deserves.
When it comes to collecting, usually the richer wins hands down, full stop. But at least on this forum, most of the times I get the impression that the right machine comes in the hands of the right man, each truly deserving each other.
When it comes to collecting, usually the richer wins hands down, full stop. But at least on this forum, most of the times I get the impression that the right machine comes in the hands of the right man, each truly deserving each other.
-
- Victor I
- Posts: 134
- Joined: Mon Jun 13, 2011 8:05 pm
Re: The things we do for gramophones!
Hello Alex,
I haven't been on this forum in many many months and so hadn't seen your thread. The gramophone fits so completely naturally into that corner! And it's so good to have the unique original EMG horn base, unlike anyone else! Having been playing my own EMGCR for the last three days off and on, I know that it's superfluous to say that you'll love your EMGCR for the rest of your life. I will have mine twelve years next month and it's as enjoyable today as it was the first day - more so actually because I've sorted out the glitches in the surrounding acoustical areas.
You have your place in the Book of Records as the youngest EMGCR owner on the planet! More power to you! And I enjoy the quirky way you got it in!
I haven't been on this forum in many many months and so hadn't seen your thread. The gramophone fits so completely naturally into that corner! And it's so good to have the unique original EMG horn base, unlike anyone else! Having been playing my own EMGCR for the last three days off and on, I know that it's superfluous to say that you'll love your EMGCR for the rest of your life. I will have mine twelve years next month and it's as enjoyable today as it was the first day - more so actually because I've sorted out the glitches in the surrounding acoustical areas.
You have your place in the Book of Records as the youngest EMGCR owner on the planet! More power to you! And I enjoy the quirky way you got it in!