UK Dictaphone model 10? Need to remove the mandrel but stuck
-
- Victor Jr
- Posts: 1
- Joined: Fri Mar 29, 2013 11:32 am
UK Dictaphone model 10? Need to remove the mandrel but stuck
I have just bought a UK made Dictaphone model 10 (I think) and have been cleaning it up. Unfortunately I undid one of the screws on the mandrel that hold the springs that hold the cylinder and now i have to remove the mandrel to hold the springs in place and put the screw back. I am at the point of trying to understand how to remove the black hollow screw on the end of the shaft that retains the large motor pulley. I think once this is removed the mandrel shaft can be extracted - could be wrong ofcourse. Can someone advise how the black screw is removed because I don't want to bust it! Thanks for any help.
- JeffHowe
- Victor Jr
- Posts: 13
- Joined: Mon Apr 26, 2021 5:30 pm
- Personal Text: Jeff
Re: UK Dictaphone model 10? Need to remove the mandrel but stuck
Hey
Saw your post - I have done exactly the same thing!
Did you get it fixed?
Cheers!
Saw your post - I have done exactly the same thing!
Did you get it fixed?
Cheers!
- chunnybh
- Victor III
- Posts: 701
- Joined: Tue Jun 30, 2009 8:17 am
- Personal Text: "If I had all the money I'd spent on drink, I'd spend it on drink." Vivian Stanshall
- Location: Victoria. Australia
- Contact:
Re: UK Dictaphone model 10? Need to remove the mandrel but stuck
I've just been working on a Dictaphone 12. I'm guessing removing the mandrel is the same.
Remove the name plate
Note the half circle plate held in place with a screw. Follow the red arrow in the picture.
Remove the screw and plate
Note a pin under the plate
Push the pin in a little
Turn the mandrel and then pull the pin out with plyers
Loosen the other screw marked with a green arrow
Reverse to fit
Remove the name plate
Note the half circle plate held in place with a screw. Follow the red arrow in the picture.
Remove the screw and plate
Note a pin under the plate
Push the pin in a little
Turn the mandrel and then pull the pin out with plyers
Loosen the other screw marked with a green arrow
Reverse to fit
- JeffHowe
- Victor Jr
- Posts: 13
- Joined: Mon Apr 26, 2021 5:30 pm
- Personal Text: Jeff
Re: UK Dictaphone model 10? Need to remove the mandrel but stuck
Many thanks for the reply.
Seems this is a 'common' mistake, loosening the mandrel spring screws.
My model must be different enough because what you're describing doesn't do it for me
I found an answer on this thread - the end nut has to come off.. viewtopic.php?f=2&t=44261&p=292512&hili ... ne#p292512
Seems this is a 'common' mistake, loosening the mandrel spring screws.
My model must be different enough because what you're describing doesn't do it for me
I found an answer on this thread - the end nut has to come off.. viewtopic.php?f=2&t=44261&p=292512&hili ... ne#p292512