Brushes for Garrard Universal Motor

Discussions on Talking Machines of British or European Manufacture
Post Reply
Idelia412
Victor Jr
Posts: 27
Joined: Thu Jul 05, 2018 12:41 pm
Personal Text: EMG

Brushes for Garrard Universal Motor

Post by Idelia412 »

Hello,

Does anyone know where you can get new brushes for a Garrard Universal Motor that is in an EMG Mark IX? If anyone knows the measurements and where to order them that would be very helpful. I bought an EMG Mark IX back in 1984. Every once in a while the motor stops and if I remove and reinsert the brushes it starts running again. I am guessing the brushes are getting to short and need to be replaced. Considering EMG's were made in the England, measurements would be in the metric system, so please provide those measurements if know as I am located in the states.

User avatar
barnettrp21122
Victor IV
Posts: 1600
Joined: Thu Jan 08, 2009 4:19 pm
Personal Text: "Did you ever stop to think that pleasure is a duty?" (Victor sales pamphlet)

Re: Brushes for Garrard Universal Motor

Post by barnettrp21122 »

I've gotten brushes from this outfit. They were very helpful regarding size and type:

https://eurtonelectric.com/

Brushes specifically:
https://store.eurtonelectric.com/brushes.aspx

Hope this helps!
Bob
"Comparison is the thief of joy" Theodore Roosevelt

His Master's Voice Automatic 1A Exponential Gramophone Demonstration:
https://www.youtube.com/watch?v=Qi70G1Rzqpo

Post Reply