Hello there.
I am a new member seeking a model to purchase.
I need a 4-speed machine. I have learn about Lenco L75 and L78, but recentely I have seen there are Dual made models also with idler drive. Prefferably fully manual.
My goal is to plug it to the amp/receiver and use all speeds. Full frequency response would be nice, not that I was planning on playing any quad albums, but who knows.
Do you have any recommendations?
So, which one should I get?
- Marco Gilardetti
- Victor IV
- Posts: 1398
- Joined: Thu Feb 24, 2011 3:19 am
- Personal Text: F. Depero, "Grammofono", 1923.
- Location: Italy
- Contact:
Re: So, which one should I get?
The L75 and L78 are both decent machines although nothing to write home about, the idler wheel being of course their most prominent defect. But do you really need a vintage turntable? There are to-day turntables with an adjustable range that goes from 16 RPM up to well over 78.
The frequency response depends exclusively on the pick-up with which you will equip the turntable.
The frequency response depends exclusively on the pick-up with which you will equip the turntable.
-
- Victor Jr
- Posts: 2
- Joined: Sun May 17, 2020 3:54 pm
Re: So, which one should I get?
How is an idler a defect?
From hat I have heard they are highly regarded on par with direct drive.
I am not aware of any modern machine, if you can recommend one that is decentely constructed and has 4 selectable speeds as existing choices it might be a viable option for me.
As for the 78s I will need to change the cartridge to a wider stylus to play them, correct?
From hat I have heard they are highly regarded on par with direct drive.
I am not aware of any modern machine, if you can recommend one that is decentely constructed and has 4 selectable speeds as existing choices it might be a viable option for me.
As for the 78s I will need to change the cartridge to a wider stylus to play them, correct?
-
OnlineOrchorsol
- Victor IV
- Posts: 1625
- Joined: Wed Feb 22, 2012 9:03 am
- Location: Dover, UK
- Contact:
Re: So, which one should I get?
I shall appear to differ with my good friend Marco and say that the idler design is their greatest asset! - having a very positive drive and a massive platter. But I do agree with Marco in the sense that that the idler wheel can cause problems - its surface, or its bearing, or the surface of the turntable which is runs on, can cause rumble.
Like many people I much prefer the old heavy idler turntables like the Garrards, Thorens TD-124, Garrard 301 & 401 and the various Lencos over all belt drive and direct drive designs - but they have to be seriously overhauled and maintained, and mounted in a suitable plinth, to perform at their best.
Currently as a temporary measure I'm using a Dual idler turntable, and I'm impressed with it. I think either Lenco or Dual would be great, but they have to be in really good order.
Like many people I much prefer the old heavy idler turntables like the Garrards, Thorens TD-124, Garrard 301 & 401 and the various Lencos over all belt drive and direct drive designs - but they have to be seriously overhauled and maintained, and mounted in a suitable plinth, to perform at their best.
Currently as a temporary measure I'm using a Dual idler turntable, and I'm impressed with it. I think either Lenco or Dual would be great, but they have to be in really good order.
BCN thorn needles made to the original 1920s specifications: http://www.burmesecolourneedles.com
Youtube channel: https://www.youtube.com/channel/UCe4DNb ... TPE-zTAJGg?
Youtube channel: https://www.youtube.com/channel/UCe4DNb ... TPE-zTAJGg?