I have recently Googled a lot of photos of Victor E rear mount and the very early Victor 1 machines specifically looking for a small Black and Brass horn that had a Nipper decal. Of course I saw several slightly larger horns with the horn adapter to fit the small machines that had the decal .... but I didn’t see a single small ( 14-15 inch long) horn with the decal , Even though the machines themselves had the Nipper ID plate.
So I thought that I would ask you experts out there , Did Victor offer a small Black and Brass Bell horn for the Very First small Rear Mount machines ( either Rigid or Taper Arm ) that had the Nipper decal ?
Thanks guys.
Jim
Was Nipper decal ever on the 14 inch Rear Mount Horn
-
- Victor O
- Posts: 94
- Joined: Wed Jun 17, 2015 4:33 pm
- Ripduf1
- Victor III
- Posts: 838
- Joined: Thu Jul 01, 2010 1:41 pm
- Personal Text: HORNS ROLLED & STRAIGHTENED
- Location: New England
- Contact:
Re: Was Nipper decal ever on the 14 inch Rear Mount Horn
While I have never owned the small Victor Horn w decal, they were produced. I have two in my shop right now to have the dents removed and I am attaching a picture of one. So yes, they did exist. John
Horns rolled and straightened
- Zwebie
- Victor IV
- Posts: 1385
- Joined: Thu Feb 23, 2012 2:55 pm
- Personal Text: We are only the caretakers for future generations.
- Location: FLORIDA
Re: Was Nipper decal ever on the 14 inch Rear Mount Horn
Hi Jim,I have recently Googled a lot of photos of Victor E rear mount and the very early Victor 1 machines specifically looking for a small Black and Brass horn that had a Nipper decal. Of course I saw several slightly larger horns with the horn adapter to fit the small machines that had the decal .... but I didn’t see a single small ( 14-15 inch long) horn with the decal , Even though the machines themselves had the Nipper ID plate.
So I thought that I would ask you experts out there , Did Victor offer a small Black and Brass Bell horn for the Very First small Rear Mount machines ( either Rigid or Taper Arm ) that had the Nipper decal ?
The answer is Yes! Here is a picture of a 1905 Victor "E" that I once owned, with its original decaled horn.
Cheers, Bob S.
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: Was Nipper decal ever on the 14 inch Rear Mount Horn
I never knew that these small Victor rear mount horns had a decal. The ones I have don't have a decal, nor any sign of a decal. Did the later small rear mount horns have a decal, or was that the discretion of the factory? I know a while ago, I asked if the were decals on the small front mount horns and the answer was no, they did not. Thanks for bringing this new information to light.
Harvey Kravitz
Harvey Kravitz