Ball Bearing Size
-
- Victor II
- Posts: 366
- Joined: Fri Mar 27, 2015 10:17 am
- Location: Wilmington , OH
Ball Bearing Size
What size of ball bearing goes in the bracket for a VV-IV turntable spindle?
- mick_vt
- Victor I
- Posts: 167
- Joined: Thu Jan 03, 2019 1:09 pm
- Personal Text: Foxtrotaholic
- Location: Central Vermont
Re: Ball Bearing Size
It should be just a tiny bit smaller than the hole it goes into. Best thing would be to measure the spindle hole with a caliper and order one to suitcweastlick wrote:What size of ball bearing goes in the bracket for a VV-IV turntable spindle?
-
- Victor II
- Posts: 327
- Joined: Tue Jun 02, 2009 10:19 pm
- Location: Silver Spring, MD
Re: Ball Bearing Size
The thrust ball bearing for your VV-IV is a 3/16” diameter ball, a common bicycle store or hardware store item.
The same 3/16” bearing is used generally across the Victor line. Here is a snippet from the Victor parts listing.
Mark
The same 3/16” bearing is used generally across the Victor line. Here is a snippet from the Victor parts listing.
Mark