As these two horns came from the US, I post my question in the machines section.
I have two front mount horns but I don’t know on which machines they were used (the leather elbow on the larger one is, I think, original).
Thanks a lot for your help and best wishes to all for this New Year!
Jeff
Need help for horns identification
-
- Victor II
- Posts: 256
- Joined: Sat Apr 21, 2012 6:33 am
- Location: France
-
- Victor II
- Posts: 274
- Joined: Sun May 10, 2015 10:35 pm
- Location: Stratford Ontario
Re: Need help for horns identification
It looks like a horn for a Canadian Berliner Gramophone. Berliner used a leather elbow and attached it to the horn with 2 small screws and nuts.
Nice find.
Regards,
Blain
Nice find.
Regards,
Blain
-
- Victor II
- Posts: 274
- Joined: Sun May 10, 2015 10:35 pm
- Location: Stratford Ontario
Re: Need help for horns identification
Here is a photo of the Canadian Berliner Model C. This was a later model with a screw on elbow to attach the horn but an earlier model had the leather elbow.
Regards,
Blain
Regards,
Blain
-
- Victor II
- Posts: 256
- Joined: Sat Apr 21, 2012 6:33 am
- Location: France
Re: Need help for horns identification
What a beautiful machine!
Thanks for the info which makes sense as we might have found it in Quebec. On the other hand, this model is at best scarce in Europe so I’m afraid the horn will have to wait a long time!
Happy new year.
Thanks for the info which makes sense as we might have found it in Quebec. On the other hand, this model is at best scarce in Europe so I’m afraid the horn will have to wait a long time!
Happy new year.
-
- Victor II
- Posts: 274
- Joined: Sun May 10, 2015 10:35 pm
- Location: Stratford Ontario
Re: Need help for horns identification
No Problem,
If you have any further questions, do not hesitate to email me. If you decide to let them go, please contact me.
Regards,
Blain
If you have any further questions, do not hesitate to email me. If you decide to let them go, please contact me.
Regards,
Blain