Rcord cabinet
-
- Victor II
- Posts: 275
- Joined: Thu Nov 19, 2009 9:12 pm
- Personal Text: Nyuk Nyuk Nyuk.........Why Soitenly
- Location: Clinton Twp., Michigan
Rcord cabinet
ok what can you guys tell me about this cabinet? Just bought it and dont know much about it.
- Roaring20s
- Victor V
- Posts: 2548
- Joined: Wed Jun 13, 2012 1:55 am
- Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
- Location: Tucson, AZ
Re: Rcord cabinet
Similar to these...
viewtopic.php?f=9&t=42297
viewtopic.php?f=2&t=31407
I do not know for what machine it belongs to.
Possibly a VV-X or a VV-XI? They have feet and a flat bottom rail.
The VV-XII has feet, but it has rounded corners.
It could be for another brand, too?
James.
viewtopic.php?f=9&t=42297
viewtopic.php?f=2&t=31407
I do not know for what machine it belongs to.
Possibly a VV-X or a VV-XI? They have feet and a flat bottom rail.
The VV-XII has feet, but it has rounded corners.
It could be for another brand, too?
James.
- phonogfp
- Victor Monarch Special
- Posts: 7384
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Rcord cabinet
It's a Salter, and I suspect it's for the later VV-IX with small feet.
George P.
George P.
-
- Victor Monarch Special
- Posts: 8510
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Rcord cabinet
That has the potential to be a very attractive record cabinet. My guess would be the Victrola IX with the curved base and little corner feet. What are the top measurements on the cabinet?
Jerry B.
Jerry B.
-
- Victor II
- Posts: 275
- Joined: Thu Nov 19, 2009 9:12 pm
- Personal Text: Nyuk Nyuk Nyuk.........Why Soitenly
- Location: Clinton Twp., Michigan
Re: Rcord cabinet
32H x 17W x 21D
- Ripduf1
- Victor III
- Posts: 830
- Joined: Thu Jul 01, 2010 1:41 pm
- Personal Text: HORNS ROLLED & STRAIGHTENED
- Location: New England
- Contact:
Re: Rcord cabinet
George nailed it. It is a cabinet designed to fit a table top Victrola IX. Each foot will fit to those recessed areas at each corner. It is nice to have found it with the interior still intact. - John
Horns rolled and straightened
-
- Victor II
- Posts: 293
- Joined: Sun Mar 10, 2019 4:02 pm
Re: Rcord cabinet
Very nice cabinet
- audiophile102
- Victor IV
- Posts: 1219
- Joined: Tue May 12, 2015 12:50 pm
- Personal Text: Say to yourself I am so happy hurray!
- Location: Brookfield, Illinois
Re: Rcord cabinet
My IX cabinet was made by Pooley and it's great, but I like yours very much. Clean it up and find a good looking IX to top it off. They are plentiful so be picky.
"You can't take the phonographs nor the money with you, but the contentment the phonographs bring may well make your life better, and happier lives make the world a better place."