I am looking to replace a couple of worn parts from a Brunswick triple-spring motor from a 1917 model 17 phonograph. I am attaching a picture of the specific gears that are part of the crank shaft for the springs. Any help I can get is appreciated.
Larry
Brunswick Motor Parts Needed
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
- Phono-Phan
- Victor V
- Posts: 2465
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Brunswick Motor Parts Needed
Can you post a picture of the whole motor? Where are you located?
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
Re: Brunswick Motor Parts Needed
The motor is not with me at the moment, otherwise I would. I live in Buckley, Washington.
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
- Phono-Phan
- Victor V
- Posts: 2465
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Brunswick Motor Parts Needed
I will dig through my parts tomorrow.
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
Re: Brunswick Motor Parts Needed
Thanks for having a look!
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
- Phono-Phan
- Victor V
- Posts: 2465
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Brunswick Motor Parts Needed
Will anything from these parts work? I have some two spring motors and not sure if the parts you are looking for are the same for the three spring version.
- Attachments
-
- IMG_1106.jpg (181.38 KiB) Viewed 298 times
-
- IMG_1105.jpg (181.49 KiB) Viewed 298 times
-
- IMG_1104.jpg (154.06 KiB) Viewed 298 times
-
- Victor Monarch Special
- Posts: 5282
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Brunswick Motor Parts Needed
Make sure that the winding shaft lengths are the same. They could easily differ between a 2 spring and a 3 spring motor. I would think the gears themselves should be the same however.Phono-Phan wrote: ↑Mon Jan 23, 2023 4:28 pm Will anything from these parts work? I have some two spring motors and not sure if the parts you are looking for are the same for the three spring version.
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
Re: Brunswick Motor Parts Needed
I can’t see the gear teeth on the winding gears. There are 2 different versions, teeth at an angle or teeth straight across. I need the teeth at an angle. Can you check the gears on the winding crank shaft?