I have a loose winding shaft with the angled gear and one on a complete motor. Let me know if you can use either option. Both winding shafts are the same length. Hope it helps.
Ken Brekke
Brunswick Motor Parts Needed
- Phono-Phan
- Victor V
- Posts: 2479
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Brunswick Motor Parts Needed
- Attachments
-
- IMG_1107.jpg (137.24 KiB) Viewed 183 times
-
- IMG_1109.jpg (165.37 KiB) Viewed 183 times
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
Re: Brunswick Motor Parts Needed
Zooming in, it looks like these 2 parts are correct. Hard to tell from pictures though.
- Phono-Phan
- Victor V
- Posts: 2479
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Brunswick Motor Parts Needed
I took a closer look and the larger angled gear is part of the shaft that goes through the spring barrels. The loose on in the pictures has a bad angle gear. The best option is for the whole spare motor. Unless someone else replies with the parts. You can also check with George Vollema at Great Lakes Phonographs or Ron Haring in Illinois. The might have just the gears you are looking for. As a back up, I can send the whole motor.
Ken Brekke
Ken Brekke
-
- Victor Monarch Special
- Posts: 5347
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Brunswick Motor Parts Needed
Just to be a stickler, "angled gear" = "helical gear".
-
- Victor Jr
- Posts: 8
- Joined: Mon Oct 17, 2022 7:48 pm
- Personal Text: Coffee Guy
- Contact:
Re: Brunswick Motor Parts Needed
Thank you, Ken. I’ve been texting you privately with my next steps. Not sure if you are getting my messages. I went ahead and emailed George to see what he might have. I’ll get back to you when I get an answer. Good to know the whole motor is an option. Maybe you can message me privately about details such as postage and price.
Larry
Larry