Identifying Victor Victrola
-
- Victor Jr
- Posts: 2
- Joined: Fri Aug 17, 2012 10:58 pm
Identifying Victor Victrola
I picked up this rough Victrola at an auction today for $10. It is a RCA Victor, but what model? Any ideas?
- m0xiemama
- Victor II
- Posts: 363
- Joined: Wed Jul 18, 2012 12:56 am
- Location: Pittsburgh, PA
Re: Identifying Victor Victrola
Looks like the VV 1-1... If it is you should be able to find the serial number on a plate under the turntable. Here's the info about it http://www.victor-victrola.com/1-1.htm
-
- Victor IV
- Posts: 1269
- Joined: Sun Oct 25, 2009 12:53 pm
- Location: Michiana
Re: Identifying Victor Victrola
No. Not exactly.
It is a Victor 1-1 with the tone arm and back bracket from a very early Victor Victrola IV or VI attached. Franken-phone. Don;t despair, though, that tone arm is in some demand as it fits the Victor II (and the very late Victor I) open horn machine(s).
The tone arm for the VV 1-1 and 1-2 did not have the gooseneck, it was hinged at the back, moving much in the manner of a moder electric phonograph tone arm.
Check for photos HERE:
http://www.victor-victrola.com/1-1.htm
and HERE:
http://www.victor-victrola.com/1-2.htm
to see the way that these machines should be equipped.
I may need a Victor II tone arm myself!
I do not, however have a good example of the correct arm and bracket for your machine. the swivels were made of
pot-metal, and many have swelled up and broken.
It is a Victor 1-1 with the tone arm and back bracket from a very early Victor Victrola IV or VI attached. Franken-phone. Don;t despair, though, that tone arm is in some demand as it fits the Victor II (and the very late Victor I) open horn machine(s).
The tone arm for the VV 1-1 and 1-2 did not have the gooseneck, it was hinged at the back, moving much in the manner of a moder electric phonograph tone arm.
Check for photos HERE:
http://www.victor-victrola.com/1-1.htm
and HERE:
http://www.victor-victrola.com/1-2.htm
to see the way that these machines should be equipped.
I may need a Victor II tone arm myself!
I do not, however have a good example of the correct arm and bracket for your machine. the swivels were made of
pot-metal, and many have swelled up and broken.
-
- Victor III
- Posts: 548
- Joined: Sun Sep 05, 2010 10:56 pm
Re: Identifying Victor Victrola
Technically its not an RCA Victrola, as RCA did not acquire the Victor Talking Machine Company for many years after this unit was produced.
-
- Victor Jr
- Posts: 2
- Joined: Fri Aug 17, 2012 10:58 pm
Re: Identifying Victor Victrola
Ok, thanks!
I want to get it open, but can't seem to get the arm off. How do you do that?
What would you appraise this machine at?
I want to get it open, but can't seem to get the arm off. How do you do that?
What would you appraise this machine at?
- ewok
- Victor O
- Posts: 78
- Joined: Thu May 03, 2012 10:19 am
- Location: Taipei, Formosa (Taiwan)
Re: Identifying Victor Victrola
For $10, it is worthy the money. You may either use the parts to fix your other phonographs or sell parts to make some profit.
andrew.perrong wrote:Ok, thanks!
I want to get it open, but can't seem to get the arm off. How do you do that?
What would you appraise this machine at?
-
- Victor Monarch Special
- Posts: 8517
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Identifying Victor Victrola
I've always thought of the 1-1 and 1-2 as the final form of the Victrola IV. The 1-1 is not frequently found. In forty plus years of collecting, I have only owned one 1-1 and one 1-2. I think it is worth trying to complete. Jerry Blais
- FloridaClay
- Victor VI
- Posts: 3708
- Joined: Wed Jan 26, 2011 7:14 pm
- Location: Merritt Island, FL
Re: Identifying Victor Victrola
Me too. If I had the good fortune to pick it up for $10 I would clean up the arm and sell it off and go hunting for an original; probably starting with a WTB ad here and a call to George Vollema.Jerry B. wrote:I've always thought of the 1-1 and 1-2 as the final form of the Victrola IV. The 1-1 is not frequently found. In forty plus years of collecting, I have only owned one 1-1 and one 1-2. I think it is worth trying to complete. Jerry Blais
Clay
Arthur W. J. G. Ord-Hume's Laws of Collecting
1. Space will expand to accommodate an infinite number of possessions, regardless of their size.
2. Shortage of finance, however dire, will never prevent the acquisition of a desired object, however improbable its cost.
1. Space will expand to accommodate an infinite number of possessions, regardless of their size.
2. Shortage of finance, however dire, will never prevent the acquisition of a desired object, however improbable its cost.