The Talking Machine Forum — For All Antique Phonographs & Recordings

Currently I am restoring an HMV Mod. 102, a deluxe one in red leather and gilded fittings (if interested please consider viewtopic.php?f=11&t=47258).

Following the list of wanted components (preferably gilded, * must be gilded):

• 5x long motor board screws.
  4x short motor board bolts (2x of them are necessary to held in place the tone arm clip)
  1x tone arm clip
  1x tone arm bolt
  1x turntable clip
  1x winding handle wooden pommel and retaining clip (I do not care about its condition)
  4x motor bolts (and washers)
  1x spring barrel retaining clip
  1x HMV mod. 5a or 5b or 16 soundbox *

Feel free to pm me. Thank-you.

[quote="HMV130"]
5x long motor board screws.
4x short motor board bolts (2x of them are necessary to held in place the tone arm clip)

[/list]

You actually need 3 wood screws and 5 screw " bolts " and you won't find any gilded BUT gilding is very easy and cheap using French polish and gold leaf

https://www.wish.com/product/59cbb9678e ... &share=web

soundgen wrote:

HMV130 wrote: 5x long motor board screws.
4x short motor board bolts (2x of them are necessary to held in place the tone arm clip)

[/list]

You actually need 3 wood screws and 5 screw " bolts " and you won't find any gilded BUT gilding is very easy and cheap using French polish and gold leaf

https://www.wish.com/product/59cbb9678e ... &share=web

Ops! I got confused, you are right. thank-you. May I ask you if you have some of the needed components?