I have looked everywhere but cannot locate a governor gear for the two spring motor on my Celeste Trench.
The problem is that the fibre gear has, as is usual, worn out.
I would appreciate any help or guidance.
Pictures attach of the worn gear and motor wanted.
Thank you.
Double spring Swiss motor or parts Wanted
-
- Victor I
- Posts: 100
- Joined: Thu Oct 11, 2018 11:11 am
- Location: Essex. UK.
-
- Victor V
- Posts: 2998
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Double spring Swiss motor or parts Wanted
Get some epoxy metal filler adhesive and fill in the worn gear after thorough cleaning with white spirit , and assuming you don't have a gear cutter lathe , cut the gear using a very fine needle file slow and laborious but ultimately successful, that's how clocks and watches were made
https://www.eternaltools.com/blog/why-e ... e-file-set
https://www.eternaltools.com/blog/why-e ... e-file-set