Morning folks!
I'm in the process of cleaning up a late Model A Edison Gem and am stumped as to how to properly remove, clean and re-grease the mainspring. It's in good shape and doesn't need to be replaced but I can't figure out how to detach it from the winding arbor or the gear on the other side. Obviously don't want to damage it so hoping someone can explain the process! I've currently got the spring assembly controlled by a wire wrapped around it to keep it from flying away from me and soaking in mineral spirits to loosen the old grease.
Thanks in advance!
Removing the Mainspring in an Edison Gem
-
- Victor Jr
- Posts: 9
- Joined: Thu Dec 06, 2018 9:21 am