If you want to try a Victor motor look on YouTube for chilldude2007. He has a 6 part series where he disassembles and reassembles a Victor two springer. Very detailed and what I watched to start doing my own repair and re-greasing of motors.
Terry
Collector Not Experienced with Motor Repair
- 85corvetteman
- Victor O
- Posts: 52
- Joined: Fri Sep 11, 2015 11:33 pm
- Personal Text: Vic II, Vic III, Schoolhouse, VV 8-4, VV-130, VV-280, VE-XVI, VV-VIII, VV-IV, VV-VI, Credenza
- Location: Rocket City, AL
- Granby
- Victor II
- Posts: 402
- Joined: Tue Dec 24, 2019 9:41 am
- Personal Text: The Granby Phonograph Historian
- Location: Eastern North Carolina
- Contact:
Re: Collector Not Experienced with Motor Repair
Thanks, Terry. I will see if I can find the videos and check them out.85corvetteman wrote:If you want to try a Victor motor look on YouTube for chilldude2007. He has a 6 part series where he disassembles and reassembles a Victor two springer. Very detailed and what I watched to start doing my own repair and re-greasing of motors.
Terry
- NEFaurora
- Victor IV
- Posts: 1201
- Joined: Sat Feb 20, 2010 7:02 pm
- Personal Text: "A Phonograph in every home..."
- Location: Melbourne, FL (Former New Yorker!)
Re: Collector Not Experienced with Motor Repair
I'm with Jerry...I know how to install new mainsprings in the Springs Barrels as well, but I send out my Spring Barrels and have the Mainsprings installed as well... It cuts down on time, and I'd rather pay to have it done... I do everything else myself though..
Tony K.
Edison Collector/Restorer
)
Tony K.
Edison Collector/Restorer
)
-
- Victor II
- Posts: 394
- Joined: Thu May 11, 2017 7:50 pm
- Personal Text: YouTube: Dyslexic Genius Hurt
- Location: Simpsonville, South Carolina
Re: Collector Not Experienced with Motor Repair
I like to do motor work that is what Iam into. look at my videos this one is on springs https://www.youtube.com/watch?v=Wba904WbNHs&t=74s