Group,
When you are setting the Reproducer Height on the Edison Diamond Disc Phonographs, make sure that the two set screws 9 NO 1 & 2) on the top support are loose and the lifting Handle is up (1\8 inch) , per the instructions. This lets the adjustment near the horn work and set the height, NOT the lifting handle.
Marc
Setting Reproducer Height on Edison Diamond Disc S-19
- Marc Hildebrant
- Victor II
- Posts: 239
- Joined: Tue Jun 07, 2016 4:37 pm
- Personal Text: Vic-Trolla
- Location: Cape Cod