Aging paper products
- Homestead
- Victor Jr
- Posts: 40
- Joined: Thu Dec 14, 2023 12:10 am
- Personal Text: Deep in the East Texas Phonograph Desert
- Location: East Texas
- Contact:
Aging paper products
Recently bought a replica instruction sign to go into my 1916 Hexaphone. Shaun O'Rourke sells them in either white or aged look. I got the white one. I located some slim cardboard stock to use for the sign. To "age" it I soaked it in a strong solution of tea about 30 seconds. After removal and rinsing when it was almost totally dry I ran it though the ink jet printer....looks really good. I assume the same could be done for labels and other products. Try it and see for yourself. James. Manker. Sorry pic posted upside down....oh well.
- Curt A
- Victor Monarch Special
- Posts: 6475
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
Re: Aging paper products
After aging and printing with an inkjet printer, spray it with a matte UV preservative, like Krylon to keep the ink from fading or running.
White printed paper can also be aged with a coat of Amber shellac.
White printed paper can also be aged with a coat of Amber shellac.
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
- Homestead
- Victor Jr
- Posts: 40
- Joined: Thu Dec 14, 2023 12:10 am
- Personal Text: Deep in the East Texas Phonograph Desert
- Location: East Texas
- Contact:
Re: Aging paper products
Thank you Curt....good tips
-
- Victor III
- Posts: 902
- Joined: Sun Nov 21, 2021 10:22 pm
Re: Aging paper products
Interesting. Thank you.
I am struggling with the opposite problem, trying to de-age and save foxing, self-disintegrating paper artefacts.
For the ageing/artificially-foxing of labels, I would suggest starting with acid/lignin free paper stock. I would get some litmus paper and check the pH of the ageing solution and use a mild acid or alkali to get it as close to neutral as possible. Your labels should then last longer than the originals.
I am struggling with the opposite problem, trying to de-age and save foxing, self-disintegrating paper artefacts.
For the ageing/artificially-foxing of labels, I would suggest starting with acid/lignin free paper stock. I would get some litmus paper and check the pH of the ageing solution and use a mild acid or alkali to get it as close to neutral as possible. Your labels should then last longer than the originals.