![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png)
i am in need of a 10” victor turn table that will fit a Victor 3 or 4 i would appreciate it if you would look in your parts bins or where ever to see if you might have an extra. i will pay cash or i have goods parts to trade. Thank you I will appreciate any help you can give
You can email me at antqflea@yahoo.com
thank you
brice
WANTED 10" TURNTABLE for VICTOR
-
Victrola20
- Victor O
- Posts: 98
- Joined: Sat Sep 30, 2017 4:02 pm
- Personal Text: If you can see the floor there is always room for more
- Location: West Coast
-
Victrola20
- Victor O
- Posts: 98
- Joined: Sat Sep 30, 2017 4:02 pm
- Personal Text: If you can see the floor there is always room for more
- Location: West Coast
Re: WANTED 10" TURNTABLE for VICTOR
turn table does not need to be a cast iron one although it would be preferred Thanks for any help you can give me
brice
brice
-
chrisg
- Victor III
- Posts: 546
- Joined: Sat Oct 05, 2013 10:24 am
- Location: North Carolina
- Contact:
Re: WANTED 10" TURNTABLE for VICTOR
Less than 30 bucks. https://www.ebay.com/itm/10-Steel-Turnt ... 632-2357-0
- Attachments
-
- IMG_20211024_26296.jpg (12.34 KiB) Viewed 405 times
-
- IMG_20211024_19261.jpg (12.64 KiB) Viewed 405 times
-
phonojim
- Victor IV
- Posts: 1429
- Joined: Wed May 20, 2009 8:20 pm
- Location: Mid - Michigan
Re: WANTED 10" TURNTABLE for VICTOR
Did you ever find this? If not I have a 10" cast iron turntable from a Victor II that I will sell. let me know and I will PM you with details.
Jim
Jim