Found: Portable phonograph tone arm

[kendphono]

I need a working portable phonograph tone arm to help a new collector. The pictures show the tone arm. The mounting end on the one they have is broken and will not pivot properly. As you can see , the one they have is pot metal and is from a Decca portable. Many of the portables used a similar tone arm with the 3 screw mounting. the tone arm does not need to be identical but it needs to pivot freely. The tone arm measures 7.5 " from the center of the base to the point where the reproducer attaches. Anything close to that measurement will work. Please let me know if you have one that might work.

Ken Danckaert
kend@lemur.org