Thank you. PM sentHerman wrote:If you send to me, I will press it off and flip for you.colmike1 wrote:I tried pushing it back down, to no avail. I will try removing it and flipping it over. ThanksJerryVan wrote:It appears that the fiber gear has slipped down on the shaft until only the corners of the teeth were engaged, which caused them to break. Push the fiber gear back up the shaft as far as it will go and give it a try.
OR
If that's not the case. Push the gear off the shaft, flip it over, and press it back on. Should work fine.
Wanted: Spindle and fiber gear for Polly Portable
-
- Victor III
- Posts: 727
- Joined: Thu Feb 26, 2015 8:27 pm
- Location: Peoria, IL
Re: Wanted: Spindle and fiber gear for Polly Portable
-
- Victor III
- Posts: 727
- Joined: Thu Feb 26, 2015 8:27 pm
- Location: Peoria, IL
Re: Wanted: Spindle and fiber gear for Polly Portable
Still looking. Herman says the gear is shot. Would consider a Polly Portable with a bad spring, worn out case, etc.