In all my years working on phonographs, I need to replace both springs in an Edison Diamond Disk Lab model. My question is: How do the spring barrels come apart. I have them out of the machine. Is there a good tutorial on doing this?
Thanks in advance, Ken Brekke
Edison Lab Springs
- Phono-Phan
- Victor V
- Posts: 2464
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
- Inigo
- Victor VI
- Posts: 3753
- Joined: Mon Dec 18, 2017 1:51 am
- Personal Text: Keep'em well oiled
- Location: Madrid, Spain
- Contact:
Re: Edison Lab Springs
You may try looking for dislexic genius hurt videos on yt, he's a member of this forum, I believe...
Inigo
- Phono-Phan
- Victor V
- Posts: 2464
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Edison Lab Springs
I searched Youtube and didn't find anything on an Edison double spring DD motor.
-
- Victor VI
- Posts: 3463
- Joined: Wed Jan 07, 2009 3:21 pm
Re: Edison Lab Springs
Did you check the archives section of this forum?
In the Directions and Manuals section, you'll find a workshop manual for the Edison Disc Motor. It should explain the step by step procedure for dismantling a double spring barrel.
In the Directions and Manuals section, you'll find a workshop manual for the Edison Disc Motor. It should explain the step by step procedure for dismantling a double spring barrel.
- Phono-Phan
- Victor V
- Posts: 2464
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Edison Lab Springs
I totally forgot about that post. Thanks for the referral.