I'm taking the spare time and the great weather to sort through the gramophone workshop rubbish accumulation http://www.gramophoneworkshop.blogspot.com , so there are dozens of scrap portables which have been used to restore stuff in the past , they all still have some useful bits on them and are free to collect , and if you collect there's more rubbish to browse and take away and some not so rubbish to buy , somewhere at the back is a library bijou !
I could probably post some in the UK for £10 as the whole case if anyone wanted them , and I could also remove the parts and post as well BUT would make a charge for removing them , and removing 8 corners is quite time consuming
If no one wants them they are toast ! I'm getting a garden incinerator
I'm also listing stuff I find on Ebay and any forum members can buy these cheaper direct ( email rather than PM as PM messages no longer get advised )
repro HMV / Victor wider ¼" internal thread
https://www.ebay.co.uk/itm/254611594968
Clearance items free of charge from MK42 9NU
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Clearance items free of charge from MK42 9NU
Last edited by soundgen on Fri May 29, 2020 11:54 am, edited 1 time in total.
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
Worst first Columbia 201 , lid stay , front clips and fittings , tone arm support rear hinge often broen ( rusty but intact )
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
second Columbia 109A , lid stay , front clips and fittings , tone arm support rear hinge often broken (looks very good )
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
HMV / Victor Gramophone motor N3 18 winds fully ( Junior Monarch ? ) 5/16 "
https://www.ebay.co.uk/itm/254611612875
https://www.ebay.co.uk/itm/254611612875
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
HMV / Victor Gramophone motor G15 winds fully ( Monarch ? ) ¼ " male
https://www.ebay.co.uk/itm/233603412299
https://www.ebay.co.uk/itm/233603412299
-
- Victor Monarch Special
- Posts: 5227
- Joined: Mon Oct 24, 2011 1:21 pm
- Personal Text: An analogue relic trapped in a digital world.
- Location: The Somerset Levels, UK.
Re: Clearance items free of charge from MK42 9NU
As you prefer email to PM, could you please state your email address. I cannot see it on your profile.soundgen wrote:I'm taking the spare time and the great weather to sort through the gramophone workshop rubbish accumulation http://www.gramophoneworkshop.blogspot.com , so there are dozens of scrap portables which have been used to restore stuff in the past , they all still have some useful bits on them and are free to collect , and if you collect there's more rubbish to browse and take away and some not so rubbish to buy , somewhere at the back is a library bijou !
I could probably post some in the UK for £10 as the whole case if anyone wanted them , and I could also remove the parts and post as well BUT would make a charge for removing them , and removing 8 corners is quite time consuming
If no one wants them they are toast ! I'm getting a garden incinerator
I'm also listing stuff I find on Ebay and any forum members can buy these cheaper direct ( email rather than PM as PM messages no longer get advised )
repro HMV / Victor wider ¼" internal thread
https://www.ebay.co.uk/itm/254611594968
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
you can see it here http://gramophoneworkshop.blogspot.com/epigramophone wrote:As you prefer email to PM, could you please state your email address. I cannot see it on your profile.soundgen wrote:I'm taking the spare time and the great weather to sort through the gramophone workshop rubbish accumulation http://www.gramophoneworkshop.blogspot.com , so there are dozens of scrap portables which have been used to restore stuff in the past , they all still have some useful bits on them and are free to collect , and if you collect there's more rubbish to browse and take away and some not so rubbish to buy , somewhere at the back is a library bijou !
I could probably post some in the UK for £10 as the whole case if anyone wanted them , and I could also remove the parts and post as well BUT would make a charge for removing them , and removing 8 corners is quite time consuming
If no one wants them they are toast ! I'm getting a garden incinerator
I'm also listing stuff I find on Ebay and any forum members can buy these cheaper direct ( email rather than PM as PM messages no longer get advised )
repro HMV / Victor wider ¼" internal thread
https://www.ebay.co.uk/itm/254611594968
ttsscc@ntlworld.com
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
Columbia 205A tone arm , motor in bits , needle pot and cover
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
HMV 101 , lid stay . front clip , 8 corners
-
- Victor VI
- Posts: 3001
- Joined: Mon May 13, 2013 2:04 pm
- Contact:
Re: Clearance items free of charge from MK42 9NU
And if anyone is looking for a part now is the time to ask It's all to go !soundgen wrote:I'm taking the spare time and the great weather to sort through the gramophone workshop rubbish accumulation http://www.gramophoneworkshop.blogspot.com , so there are dozens of scrap portables which have been used to restore stuff in the past , they all still have some useful bits on them and are free to collect , and if you collect there's more rubbish to browse and take away and some not so rubbish to buy , somewhere at the back is a library bijou !
I could probably post some in the UK for £10 as the whole case if anyone wanted them , and I could also remove the parts and post as well BUT would make a charge for removing them , and removing 8 corners is quite time consuming
If no one wants them they are toast ! I'm getting a garden incinerator
I'm also listing stuff I find on Ebay and any forum members can buy these cheaper direct ( email rather than PM as PM messages no longer get advised )
repro HMV / Victor wider ¼" internal thread
https://www.ebay.co.uk/itm/254611594968
http://gramophoneworkshop.blogspot.com/
ttsscc@ntlworld.com