Used needle pot for HMV 157

Buy, sell, or trade your phonograph-related items here
Post Reply
Phono48
Victor IV
Posts: 1313
Joined: Sun May 27, 2012 2:38 pm
Location: United Kingdom

Used needle pot for HMV 157

Post by Phono48 »

Can onyone sell me a needle pot for an HMV 157 upright cabinet machine? They are fitted to many of the cabinet and table models. It's for used needles, straight sided with a slightly concave removeable top, nickel plated.

Barry

User avatar
Orchorsol
Victor IV
Posts: 1622
Joined: Wed Feb 22, 2012 9:03 am
Location: Dover, UK
Contact:

Re: Used needle pot for HMV 157

Post by Orchorsol »

I have one here you'd be welcome to Barry, but it's taller than some HMV ones (about 26mm) - you're welcome to it if it suits!

Andy
BCN thorn needles made to the original 1920s specifications: http://www.burmesecolourneedles.com

Youtube channel: https://www.youtube.com/channel/UCe4DNb ... TPE-zTAJGg?

Phono48
Victor IV
Posts: 1313
Joined: Sun May 27, 2012 2:38 pm
Location: United Kingdom

Re: Used needle pot for HMV 157

Post by Phono48 »

Orchorsol wrote:I have one here you'd be welcome to Barry, but it's taller than some HMV ones (about 26mm) - you're welcome to it if it suits! Andy
Very kind of you, Andy, but it's too tall. The hole in the motor board is 10mm deep, so with the lid, I reckon the one I need would be around 12-15mm deep in total. Thanks, though.

Barry


Gramtastic
Victor III
Posts: 564
Joined: Fri Jan 06, 2012 5:22 am

Re: Used needle pot for HMV 157

Post by Gramtastic »

Hi Barry,

I've got one you can have. Send me a private message with your address and I'll post it.
Andrew

Phono48
Victor IV
Posts: 1313
Joined: Sun May 27, 2012 2:38 pm
Location: United Kingdom

Re: Used needle pot for HMV 157

Post by Phono48 »

Gramtastic wrote:Hi Barry,

I've got one you can have. Send me a private message with your address and I'll post it.
Andrew
Thanks Andrew, PM sent with details.

Barry

Post Reply