Restoring name plate/ID tag
-
- Victor Jr
- Posts: 18
- Joined: Sun Sep 09, 2018 1:09 pm
Restoring name plate/ID tag
Hi. I recently picked up a Victor VV-IV phonograph. I'm in the process of restoring it and I was wondering what everyone does with the name plate when they are in poor shape like mine. Is it possible to bring back the original contrast between the letters and the black background? Thanks!
- Inigo
- Victor VI
- Posts: 3743
- Joined: Mon Dec 18, 2017 1:51 am
- Personal Text: Keep'em well oiled
- Location: Madrid, Spain
- Contact:
Re: Restoring name plate/ID tag
I would suggest a soft cleaning with a suitable product (wax? soft soap?) and leave it as is. Otherwise a heavy restoration would loose the patina and make it appear as a modern repro. I'm more on the 'don't touch anything' side now... I don't like over-restored machines. They seem false.
Inigo
-
- Victor Monarch Special
- Posts: 8503
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Restoring name plate/ID tag
For a gentle restoration I'd suggest a good cleaning followed by painting the entire tag with satin or semigloss black from a rattle can. After a day or two gently rub the tag with 0000 steel wool. This will identify the raised spots that should not have paint. Next use a Q-tip and lacquer thinner to remove the black from the high surfaces and the edge. Don't get too aggressive with the lacquer thinner. Finally, rub with 0000 steel wool to remove the last of the paint on high surfaces. Wax if desired.
You want a tag with a nice black background. If you happen to rub through the black background just shoot it all black again and start over. This is really an easy process and the end result is not an over restored tag.
Jerry B.
You want a tag with a nice black background. If you happen to rub through the black background just shoot it all black again and start over. This is really an easy process and the end result is not an over restored tag.
Jerry B.
-
- Victor Jr
- Posts: 18
- Joined: Sun Sep 09, 2018 1:09 pm
Re: Restoring name plate/ID tag
Thanks for the two different opinions on cleaning/restoring the tag. I think I'll work on the rest of the machine and save the tag for last. Then I'll make the decision on how far I want to take the restoration.
- Jonsheff
- Victor II
- Posts: 286
- Joined: Mon Mar 19, 2018 11:16 pm
- Personal Text: Let's make Victrolas Great Again!
- Location: Manchester Connecticut
- Contact:
Re: Restoring name plate/ID tag
I normally just wash mine with dawn soap and very lightly rub with 0000 steel wool while cleaning. I think an authentic looking tag is best and even a worn tag on a well restored machine still looks great and doesn't detract from the overall look.