WANTED - Grill for an Edison Army Navy DD Phono

[brianu]

I’m trying to find a grill for an Edison Army Navy DD phonograph. If you have one or may have any suggestions, please let me know... message or email, brianu73 at hotmail. Thanks.

[Jerry B.]

I think your best bet is to have one made.To get you started here are photos and measurements of what you need:

15.5" wide
13"high
The metal material appears to be 1/16" thick (but please check with a piece of scrap)
The ovals are ¾" wide and 5" tall
The ovals are 5/16" apart
The vertical divider between the right and left side is 1&5/16"
The distance from one oval to the one directly below is 1&½"

I believe my machine is all original and this piece appears to be factory brush painted. I've had good customer service from Sherman Williams and they've color matched projects for me.

Let me know if I can be of additional help. There must be some place that has a copier large enough to lay my grill and make an accurate copy.

Jerry Blais

[brianu]

Thank you so much for your help and all of those specifics. I was actually able to get ahold of Tom at Gramps Treasures and he may be able to reproduce one for me. If not, I’ll definitely be in touch. Thanks again Jerry.

[Jerry B.]

Can Gramps make a metal one? Jerry

[brianu]

Can Gramps make a metal one? Jerry

That’s what he said, but it would be aluminum.

[phonogfp]

Can Gramps make a metal one? Jerry

That’s what he said, but it would be aluminum.

See if there's a laser-cutting business in your area. Such businesses can cut most any metal. I've had excellent luck with such a business.

Good luck!

George P.

[phonojim]

Brett Hurt, username cheryla, made mine out of steel of the correct thickness. It looks great, fits well and comes primed and ready to paint.

Jim

[brianu]

Can Gramps make a metal one? Jerry

That’s what he said, but it would be aluminum.

See if there's a laser-cutting business in your area. Such businesses can cut most any metal. I've had excellent luck with such a business.

Good luck!

George P.

Thanks for the suggestion George.

[brianu]

Brett Hurt, username cheryla, made mine out of steel of the correct thickness. It looks great, fits well and comes primed and ready to paint.

Jim

Thanks, I’ll try reaching out to him.

[tomb]

Like George said I have had radio parts laser cut too. The first one is expensive due to set up but the copies are cheaper. Tom