This is advertised as a phonograph, but the pictures don't make sense. It looks like a french cylinder machine, but if it is, what is missing and how would it operate?
What is this?
- Curt A
- Victor Monarch Special
- Posts: 6431
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
What is this?
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
- Lucius1958
- Victor VI
- Posts: 3936
- Joined: Tue Dec 14, 2010 12:17 am
- Location: Where there's "hamburger ALL OVER the highway"...
Re: What is this?
It's possible: the square hole on the carriage would have held an extension arm for the missing horn & reproducer. Then you'd need the upper pulley, belt, and winding key (or crank). I can't quite see where the feed screw & half nut are, though...
- Bill
- Bill
- drh
- Victor IV
- Posts: 1218
- Joined: Tue May 27, 2014 12:24 pm
- Personal Text: A Pathé record...with care will live to speak to your grandchildren when they are as old as you are
- Location: Silver Spring, MD
Re: What is this?
It probably was something like the one below. It appears to be for the so-called "inter" or "salon" sized cylinders, which were of a diameter midway between the standard size and what we call "concert" size.
-
- Victor O
- Posts: 76
- Joined: Tue Jun 09, 2020 10:43 pm
Re: What is this?
Like this
- Attachments
-
- D8194DDE-DCF8-48C6-83BC-0DB4B86D6B65.jpeg (37.24 KiB) Viewed 1397 times
-
- Victor II
- Posts: 205
- Joined: Sat Apr 17, 2010 1:08 pm
Re: What is this?
In the second photo, the presence of that little gear on the left suggests that the rear "support rod" obscures the feedscrew below that drives the reproducer assembly (once it's cleaned up and lubricated).
The wording in French for "Speed Indicator" also hints at marketing and use locally rather than for export. The mandrel is a special size (diameter) just under the more typical Pathé Salon/Inter. It was widely advertised in France. I don't think that this Phenix configuration was of the moulded variety so that may have hastened its demise.
Allen
The wording in French for "Speed Indicator" also hints at marketing and use locally rather than for export. The mandrel is a special size (diameter) just under the more typical Pathé Salon/Inter. It was widely advertised in France. I don't think that this Phenix configuration was of the moulded variety so that may have hastened its demise.
Allen
Last edited by AllenKoe on Mon Sep 20, 2021 4:57 pm, edited 1 time in total.
-
- Victor I
- Posts: 149
- Joined: Thu May 29, 2014 4:35 pm
Re: What is this?
It is the first version of Phenix. It only plays Phenix cylinders.
It is missing alot, including the crank, reproducer, horn rod and horn. The crank should be a keywind.
It was manufactured by Louis Lamaziere in approximately 1902.
You can find more complete versions on ebay France from time to time.
It is missing alot, including the crank, reproducer, horn rod and horn. The crank should be a keywind.
It was manufactured by Louis Lamaziere in approximately 1902.
You can find more complete versions on ebay France from time to time.
- Curt A
- Victor Monarch Special
- Posts: 6431
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
Re: What is this?
Thanks for the info and ID, guys... It puzzled me whether or not this was legit...
Any idea what a fair price might be - I have no idea?
Any idea what a fair price might be - I have no idea?
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
-
- Victor II
- Posts: 257
- Joined: Sat Apr 21, 2012 6:33 am
- Location: France
Re: What is this?
It’s a Phenix floating horn machine and the horn support should be similar to the pic below (I don't know which machine is on the pic).
-
- Victor II
- Posts: 257
- Joined: Sat Apr 21, 2012 6:33 am
- Location: France
Re: What is this?
I found another pic, this time from a Phenix machine but without the horn.
- Attachments
-
- phenix.jpg (51.53 KiB) Viewed 1233 times
-
- Victor I
- Posts: 149
- Joined: Thu May 29, 2014 4:35 pm
Re: What is this?
A nice, complete Phenix 1 would be $750-1000.
Phenix 2, with the ability to play both standard and Phenix cylinders is rarer and could be $1500 to $2000.
Raphael Cole had one a few years back.
Phenix 2, with the ability to play both standard and Phenix cylinders is rarer and could be $1500 to $2000.
Raphael Cole had one a few years back.