Page 19 of 31

Re: C250/C19 Database project

Posted: Wed Jul 08, 2015 10:05 am
by fran604g
A Ford 1 wrote:Hi All,
I have in past posts said I am new to the organization and I never said the DD had a medallion and in my defense I initially thought all Chippendale two spring motor machines were 250s. The machine is a C-19 and if you notice my listing states 4)none, 5) N.A. The plate 32H19 is the one I removed and cleaned it may have been mistakenly installed at the factory or switched at a later date but it is the plate that came installed in the machine and did not appear to have been tampered with.

Thank you all for your support, the great information you supply in our publication, kind thoughts, and as a retired Mechanical Engineer your technical critical comments,
Allen

p.s. I have been retired over 20 years and only had a computer for about a year and it was not until recently that I discovered the fact that there are more than one page to the posts but I am in a slow process of learning.
Hi Allen,

Speaking on behalf of many I'm sure; there is no need for apology, we're all human, and we make mistakes. It's all part of the learning experience. If you could know how many mistakes I've made just in the past year and a half, you wouldn't feel so bad. :lol:

Anyway, I happy you're here and that you're contributing to our hobby!

Best,
Fran

Re: C250/C19 Database project

Posted: Wed Jul 08, 2015 10:09 am
by BwanaJoe
Cool info, thanks. Did all the those early 19s have the numbers running down the sides? Did any of the late 250s have them as well?

I was thinking more about the price and description for the buyer being nuts. Only made in 1915. Rare with all rare records!

Re: C250/C19 Database project

Posted: Wed Jul 08, 2015 10:31 am
by fran604g
BwanaJoe wrote:Cool info, thanks. Did all the those early 19s have the numbers running down the sides?
Hiya Joe, in a word: No. (I assume you are referring to the numbers being present on the drawers, as opposed to the more common strips located at the bottoms of the shelves of C19s)
BwanaJoe wrote:Did any of the late 250s have them as well?
None that I've come across, but who knows for certain?

This particular transitional feature seems to have been unique to the C19 model and used (intermingled with the previous style 2-drawer 5-compartment system) before the C19 record storage was eventually changed over to the more commonly recognizable vertical 2-shelf individual-slot system found in so many C19s.

NOTE: I've deliberately tried to keep my answers short and to the point; as many of you know, I'm in the process of writing a series of articles on the Chippendale C250/C19 to be published beginning this fall in the journal of the Antique Phonograph Society's The Antique Phonograph, and I don't want to "muddy the waters" -- so to speak -- with too little (and potentially confusing) information given in these posts. I think that would be irresponsible of me to do at this point.

Best,
Fran

Re: C250/C19 Database project

Posted: Wed Jul 08, 2015 11:11 am
by phonogfp
fran604g wrote:
NOTE: I've deliberately tried to keep my answers short and to the point; as many of you know, I'm in the process of writing a series of articles on the Chippendale C250/C19 to be published beginning this fall in the journal of the Antique Phonograph Society's The Antique Phonograph, and I don't want to "muddy the waters" -- so to speak -- with too little (and potentially confusing) information given in these posts. I think that would be irresponsible of me to do at this point.

Best,
Fran
...And as one who has been privileged to see Fran's drafts and illustrations, I'm very much looking forward to seeing all this information available to collectors. The Chippendales (C-250 & C-19) are excellent machines commonly found in collections. Fran has uncovered (sometimes with the help of this forum) lots of information that has never been in print before. It's fitting that in this centennial year of its introduction, the Chippendale is the subject of an in-depth study (probably a 3-part article) in the pages of The Antique Phonograph. Fran's research goes far beyond what's in Frow, and I guarantee that we'll all learn something more about a machine so familiar to us! :)

George P.

Re: C250/C19 Database project

Posted: Wed Jul 08, 2015 11:57 am
by fran604g
Thank you for the kind words, George. I'm grateful for all of the help I've received here on the board! It still amazes me how much there is to know about the Chippendale.

How deceptively simple it appeared to me when I started down this path nearly a year and a half ago! :geek:

I hope others will build upon the knowledge base long after my work disappears. I never thought I would become as obsessed with just one model of talking machine as I have with the C250, its' predecessors, and its' successor.

Best,
Fran

Re: C250/C19 Database project

Posted: Fri Jul 24, 2015 4:12 pm
by fran604g
Hi folks,

In the spirit of sharing my own personal info (as you all have done for me :) ), I have an entry to the database; a C 19 I brought home last week from a local Salvation Army store:

1. Model Designation: C 19

2. Serial Number: SM-172,249

3. Bedplate Pinstriping: No

4. "Official Laboratory" Medallion: Round

5. Exact Wording of the Medallion: Diamond Disc Phonograph Official Laboratory Model Thos A Edison

6. Record Storage: 2 Shelves

7. Cabinet Wood Type: Mahogany

8. Duncan Stop?: No

9. Dealer Tag: None

10. Original Dated Sales Receipt/Shipping Documentation, etc.: None, but Factory No. 19 sticker is serialized -- 18754

11. Grille cloth? Color? None

For those with C-19's, please supplement the above information to include the following addendums to the list of criteria that I've asked for previously:

12) Is the reproducer, horn throat, and other hardware on the turntable gold plated or gun-metal? "Gun-metal"

13) Is the record storage door held open by a rod at the top, center shelf or the bottom of the cabinet? Center

14) Are the numbered strips for the record storage 1-36 on both strips or 1-36 on the top strip and 37-72 on the bottom strip? Top shelf 1-36, bottom shelf 37-72

15) Does the governor have 2 springs or 3 springs? 2 springs

Best
Fran

Re: C250/C19 Database project

Posted: Fri Jul 24, 2015 5:22 pm
by columbia1spring
Still looking for this info...
would you like pictures as well?

Re: C250/C19 Database project

Posted: Fri Jul 24, 2015 5:27 pm
by fran604g
columbia1spring wrote:Still looking for this info...
would you like pictures as well?
Hiya,

Pictures aren't neccessary, but you're welcome to include pictures of your own personal Chipendale, if you wish.

I don't think it would help if all of the machines listed on eBAY or Craiglist suddenly appeared in this project. ;)

Best,
Fran

Re: C250/C19 Database project

Posted: Fri Jul 24, 2015 8:27 pm
by columbia1spring
I will go threw the list you posted and get all the info you request.
I have had my Machine almost 30 years!!
Give me a few days

Re: C250/C19 Database project

Posted: Fri Jul 24, 2015 8:28 pm
by fran604g
columbia1spring wrote:I will go threw the list you posted and get all the info you request.
I have had my Machine almost 30 years!!
Give me a few days
Wonderful! Thank you.

Fran