Re: Odd items found inside phonographs
Posted: Mon Jul 26, 2021 8:50 pm
Cleaning-up a 1925 VV-50, in it, a needle spill, a small chunk of a red Vocalion, a 1926-D penny, and a Flapper.
James.
https://forum.talkingmachine.info/
Sorry for the very late reply, Henry. Thank you and yes, after picking the lock I removed and serviced it. It works like new.Henry wrote: Sun Feb 14, 2021 4:16 pm Beautiful machine, django! Does the stubborn lock now work with the key?
Late to the party, as usual, but...to my eye that looks like one of those non-slip stick-ons for bathtubs.Herderz wrote: Sat Feb 13, 2021 4:58 pm I recently started on a VV-VI. Pulling the upper horn mount to the tonearm I found a flower child cut-out in the neck of the cast iron horn. Looks like 1960's hippy thingy, or "laugh-in" tv series piece. Who knows?20210213_164718.jpg
Perhaps it went over the turntable spindle to keep the turntable in place? Or maybe to prevent impact on the spindle if the turntable is packaged above it or elsewhere.Roaring20s wrote: Sat Mar 11, 2023 9:53 pm Original packing bits found in a Victor IV.
Its motor shipping block and info card.
Also, a mystery block is 3.5" square with the 1" hole does not seem to fit with any motor part. It's not for the winding stem.![]()
James.
VicIV.1.thumb.png.6e5dde8916dbfb6bd58ba885376dcb1e.png
VicIV.2.png.9e3cf61d084457bc3fd000a62e6d3ca7.png
VicIV.3.thumb.JPG.29750931052e5a98babdfdd389f170be.jpg
VicIV.4.png.c97e2dd7e8a6c670fce06d2d9d488559.png
I did give the turntable a thought. They might have tied it in place?jamiegramo wrote: Sun Mar 12, 2023 12:14 pm Perhaps it went over the turntable spindle to keep the turntable in place? Or maybe to prevent impact on the spindle if the turntable is packaged above it or elsewhere.
Very interesting. I thought woodworm was fairly rare in the states?
Great to see this wood block and instructions. Thanks for posting.Roaring20s wrote: Sat Mar 11, 2023 9:53 pm Original packing bits found in a Victor IV.
Its motor shipping block and info card.
Also, a mystery block is 3.5" square with the 1" hole does not seem to fit with any motor part. It's not for the winding stem.![]()
James.
VicIV.1.thumb.png.6e5dde8916dbfb6bd58ba885376dcb1e.png
VicIV.2.png.9e3cf61d084457bc3fd000a62e6d3ca7.png
VicIV.3.thumb.JPG.29750931052e5a98babdfdd389f170be.jpg
VicIV.4.png.c97e2dd7e8a6c670fce06d2d9d488559.png