Page 1 of 2
Reginaphone Parts Needed
Posted: Tue Feb 05, 2013 12:46 am
by downsouth
Hi guys, I've been working on my Columbia 240 Deluxe and am in need of a few items to complete it. I need a Regina crank, round brass crank escutcheon, twelve inch turntable( orig or repro on these will be fine). I need a speed indicator dial for the short bedplate mechanism and lastly for now, I need the extended dishing roller located at the 6 O'clock position. I know this is a longshot on some of these items, but I have to try. As always, any and all help greatly appreciated!
Regards, Wes
Re: Reginaphone Parts Needed
Posted: Tue Feb 05, 2013 9:21 am
by fmblizz
Check out JAS Antique Phonographs. I purchased a nice reproduction turntable for my table top reginaphone.
fmblizz
Re: Reginaphone Parts Needed
Posted: Tue Feb 05, 2013 4:23 pm
by rizbone
I've had some luck finding parts here:
http://www.nancyfrattimusicboxes.com
Re: Reginaphone Parts Needed
Posted: Tue Feb 05, 2013 8:51 pm
by downsouth
I spoke with Nancy a while back concerning another music box, but have not had the chance yet to talk with her concerning this one, but I plan to. I know some guys out there might have a few items that might help incase i can't get all i am looking for in one place so I'm keeping my fingers crossed!
Wes
Re: Reginaphone Parts Needed
Posted: Wed Feb 06, 2013 7:49 am
by fmblizz
Check with Al Meekins's in New Jersey for the crank and escutcheon.
He always has a listing on Ebay for the cranks and gears. (repro's or course)
http://www.ebay.com/itm/REGINA-CRANK-AN ... 2ec15e5c3f
blizz
Re: Reginaphone Parts Needed
Posted: Wed Feb 06, 2013 11:22 am
by fmblizz
Since we know the crank is available from Meeken, take a look at this listing.
Might do in a pinch.. Diameter looks about right might be a little large but it's cheap... Free shipping.
http://www.ebay.com/itm/8-available-Vin ... 3f21ea70ae
Blizz
Re: Reginaphone Parts Needed
Posted: Wed Feb 06, 2013 6:11 pm
by rizbone
Are you sure you need a crank escutcheon? My machine does not appear to have ever had one.
Re: Reginaphone Parts Needed
Posted: Wed Feb 06, 2013 7:22 pm
by fmblizz
My tabletop regine looks the same way,,, no escutcheon what so ever but I have seen many Regina machines with them (not necessarily a Reginaphone)..
blizz
Re: Reginaphone Parts Needed
Posted: Wed Feb 06, 2013 7:26 pm
by rizbone
True, the photo in my previous post was from my Columbia Grafonola Deluxe.
Re: Reginaphone Parts Needed
Posted: Wed Feb 06, 2013 8:43 pm
by downsouth
All the examples I have found have a simple brass escutcheon similar to the one pictured. Kind of like the ones found on a Victor VTLA. It just inserts into the hole to protect the surrounding wood.
Wes