Page 1 of 1
Early Victrola IX Parts needed
Posted: Sun Apr 14, 2013 8:27 pm
by Victor78
Im looking for the female crank (¼" shaft) and a set of the screw in type door knobs. Serial number of the machine is 21905 and would be the B style listed in the Victor Data book. Anyone have anything in their parts bin?
Jim
Re: Early Victrola IX Parts needed
Posted: Sun Apr 14, 2013 9:17 pm
by Jerry B.
I have an extra female Victor crank. Starting at the threaded end, it is 8.5" to the outside of the bend. Does your machine have the same shaft thread as a Vic III? Let me know if my crank helps you. The crank is (or used to be) nickel plated and it could be shortened and tapped. Jerry Blais