Page 1 of 1
AMBEROLA 30
Posted: Fri Nov 08, 2013 5:49 am
by debndunk
Can anyone tell me if the Amberola 30 was made with and without a moulding around the base.
many thanks Gordon
Re: AMBEROLA 30
Posted: Fri Nov 08, 2013 7:46 am
by mf77
I think every Amberola 30 picture on the net should answer that question for you
it's not a separate piece of moulding attached to the base of the cabinet, but forms the base of the cabinet itself.
- Edison Amb 30 b in weathered oak.jpg (80.28 KiB) Viewed 1230 times
Re: AMBEROLA 30
Posted: Fri Nov 08, 2013 8:07 am
by debndunk
The reason I ask is because I've seen them with a shaped base and without a shaped base
Gordon
Re: AMBEROLA 30
Posted: Fri Nov 08, 2013 8:53 am
by mf77
As far as I'm aware, they all left the factory with the same ogee profile to the base frame as shown above, and only the lid profile was changed.
I would assume the one(s) you have seen with a squared off profile have had their base altered or replaced.
Re: AMBEROLA 30
Posted: Fri Nov 08, 2013 9:35 am
by debndunk
That is what I thought may have happened, maybe it got damaged and taken off. There are 2 on British E-bay 1 with and 1 without.
Thanks Gordon