Page 1 of 1
Edison record slat removal
Posted: Thu Apr 10, 2014 9:42 pm
by Tpapp54321
I am working on cleaning my Edison l-19 and want to clean out the record storage slats but can't figure out how to remove the box holding them.
The record storage I am referring to is the ones used on Edison s-19 and pretty much every model that had record slats. Help would be much appreciated.
-Tom
Re: Edison record slat removal
Posted: Sun Apr 13, 2014 5:06 pm
by Tpapp54321
Anyone?... There's some papers shoved inside that I am really curious about.
-Tom
Re: Edison record slat removal
Posted: Sun Apr 13, 2014 7:16 pm
by De Soto Frank
Some of the cognoscenti might be away from their computers, due to the show at Wayne...
I'll take a look at my C-19 and see if anything leaps-out at me...
Re: Edison record slat removal
Posted: Sun Apr 13, 2014 7:44 pm
by edisonphonoworks
Did you try removing My LC 38 has wood screws on the slanted, index board, and 2 screws above on the more rectangle upper board. My C-19 only has 2 wood screws on the above, large flt board. Remove the top board and they should come out on an angle, they are bristol board type material with a fabric tape on the front.
Re: Edison record slat removal
Posted: Mon Apr 14, 2014 1:12 am
by Lucius1958
edisonphonoworks wrote: My LC 38 has wood screws on the slanted, index board, and 2 screws above on the more rectangle upper board.
My BC-34 has the same arrangement.
Bill