SOLD: 19 Reproducers LOT - $135
Posted: Wed Dec 17, 2014 3:59 pm
All are untested and sold as is.
Diameters noted are close for Overall and for Tone-Arm attachment.
Assume that all will need some degree of rebuilding.
Also expect some degree of surface degradation.
Plus Priority Flat Rate shipping.
Click on images for larger view.
Thanks,
James

Copper/Brass Brunswick (needle type)
front - some discoloration at 11:00
back - marked Patent Pending and the letter "O"
diameters - 2.5" and 1.0625
notes - tapping the chuck produces loud response


Orthophonics
notes - serviceable, you can make one from these two with parts left over, each ring on the back has a crack, the fronts have a few surface cracks forming

Brunswick (Pathé type)
front - marked The Brunswick-Balke-Collender Co.
diameters - 3" and .625
notes - tapping the chuck produces loud response, it should still fit on the arm despite the missing chunk

Brunswick (needle, Pathé, and edison types)
front - marked ULTONA, The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - tapping the chuck produces loud response

Brunswick (needle and Pathé types)
front - marked ULTONA, The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - tapping the chuck produces loud response,

Brunswick (needle and Pathé types)
front - marked The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - tapping the chuck produces loud response, chunk of tone arm is stuck in reproducer, needs Pathé chuck nut

Brunswick (needle and Pathé types)
front - metal diaphragm, marked The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - parts

Jewel (needle and Pathé types)
back - marked Jewel
diameters - 2.875" and .6875"
notes - tapping the chuck produces loud response, needs thumb screw

unmarked Jewel? (needle types)
diameters - 2.875" and .75"
notes - tapping the chuck produces response, needs thumb screw

Sonora (needle type)
back - Patented July 2 1918
diameters - 2.375" and .75"
notes - tapping the chuck produces loud response

Widdicomb (needle type)
diameters - 2.625" and .625
notes - parts


Caswell
diameters - 2.625" and .625"
back - pot metal is weakening
notes - tapping the chuck produces loud response, needs thumb screw, may still fit on the arm despite the missing chunks
Polk-Phone No. 118
diameters - 2.625" and .625"
front - pot metal is weakening
back - pot metal is weakening
notes - tapping the chuck produces loud response, needs thumb screw, may still fit on the arm despite the missing chunks
Unmarked Silvertone? (six opening on cover)
diameters - 2.625" and .75"
notes - serviceable
Unmarked (red diaphragm)
diameters - 2.875" and .75"
notes - serviceable
Unmarked
diameters - 2.25" and .75"
notes - serviceable
Victrola No. 4
notes - parts

Carryola Needle Bar



Edison Recorder
notes - parts
Diameters noted are close for Overall and for Tone-Arm attachment.
Assume that all will need some degree of rebuilding.
Also expect some degree of surface degradation.
Plus Priority Flat Rate shipping.
Click on images for larger view.
Thanks,
James

Copper/Brass Brunswick (needle type)
front - some discoloration at 11:00
back - marked Patent Pending and the letter "O"
diameters - 2.5" and 1.0625
notes - tapping the chuck produces loud response


Orthophonics
notes - serviceable, you can make one from these two with parts left over, each ring on the back has a crack, the fronts have a few surface cracks forming

Brunswick (Pathé type)
front - marked The Brunswick-Balke-Collender Co.
diameters - 3" and .625
notes - tapping the chuck produces loud response, it should still fit on the arm despite the missing chunk

Brunswick (needle, Pathé, and edison types)
front - marked ULTONA, The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - tapping the chuck produces loud response

Brunswick (needle and Pathé types)
front - marked ULTONA, The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - tapping the chuck produces loud response,

Brunswick (needle and Pathé types)
front - marked The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - tapping the chuck produces loud response, chunk of tone arm is stuck in reproducer, needs Pathé chuck nut

Brunswick (needle and Pathé types)
front - metal diaphragm, marked The Brunswick-Balke-Collender Co., patented Sept 18 1917
diameters - 3" and .75
notes - parts

Jewel (needle and Pathé types)
back - marked Jewel
diameters - 2.875" and .6875"
notes - tapping the chuck produces loud response, needs thumb screw

unmarked Jewel? (needle types)
diameters - 2.875" and .75"
notes - tapping the chuck produces response, needs thumb screw

Sonora (needle type)
back - Patented July 2 1918
diameters - 2.375" and .75"
notes - tapping the chuck produces loud response

Widdicomb (needle type)
diameters - 2.625" and .625
notes - parts


Caswell
diameters - 2.625" and .625"
back - pot metal is weakening
notes - tapping the chuck produces loud response, needs thumb screw, may still fit on the arm despite the missing chunks
Polk-Phone No. 118
diameters - 2.625" and .625"
front - pot metal is weakening
back - pot metal is weakening
notes - tapping the chuck produces loud response, needs thumb screw, may still fit on the arm despite the missing chunks
Unmarked Silvertone? (six opening on cover)
diameters - 2.625" and .75"
notes - serviceable
Unmarked (red diaphragm)
diameters - 2.875" and .75"
notes - serviceable
Unmarked
diameters - 2.25" and .75"
notes - serviceable
Victrola No. 4
notes - parts

Carryola Needle Bar



Edison Recorder
notes - parts