The Talking Machine Forum — For All Antique Phonographs & Recordings

"no one on this board has ever helped me find anything"

Did you get up on the wrong side of your Victrola today?

Jerry Blais

Amberola wrote:Although no one on this board has ever helped me find anything

Ronnie, you never cease to amaze. A real insult to the "many" who have gone out of their way to help YOU..really sad. .

FOUND

No offense taken. The closest I can come is a spare mandrel pulley with the big repeater gear for a two minute Triumph with repeater. Anyone need it? Jerry

Amberola wrote:I am looking for the screw on the repeater. Although no one on this board has ever helped me find anything, I will try once more.
[email protected]

The more specific you are, the more likely you are to get an answer.

There must be dozens of types of repeaters. Most are machine specific. So specifying that you want one that fits your new Home, Triumph, Idelia could be helpful I would think.

Valecnik wrote:

Amberola wrote:I am looking for the screw on the repeater. Although no one on this board has ever helped me find anything, I will try once more.
[email protected]

The more specific you are, the more likely you are to get an answer.

There must be dozens of types of repeaters. Most are machine specific. So specifying that you want one that fits your new Home, Triumph, Idelia could be helpful I would think.

I would like to have one like this one.

I believe you need the course screw that carries the carriage from the end back to the start of the cylinder. Isn't this correct? Jerry B.

Jerry B. wrote:I believe you need the course screw that carries the carriage from the end back to the start of the cylinder. Isn't this correct? Jerry B.

You are good Jerry.

Maybe this one, but it seems a bit high.

http://forum.talkingmachine.info/viewto ... 14&t=20981