Page 1 of 1
FOUND: Pending- Door hardware for VV8-12
Posted: Wed Jun 17, 2015 7:07 pm
by DGPros
I thought I only needed the left door hardware, but after some extensive cleaning, it seems I need 2. The right knob went from black to copper.
Re: Wanted: Door hardware for VV8-12
Posted: Wed Jun 17, 2015 8:56 pm
by De Soto Frank
You can get chemical solutions to darken the brass / bronze... someone around here will know a source...
Re: WANTED: Door hardware for VV8-12
Posted: Thu Jun 18, 2015 7:59 pm
by mattrx
My 8-12 has the "antique bronze" finish on the interior parts, and he knobs are the same finish. If you cleaned them too extensively, they will then just look like the brass underneath the original finish. I've read here on the forum somewhere about darkening the look back toward its original color with an acid wash.
My recent 8-35 purchase had a tone arm that had been cleaned too extensively and it looked almost gold. The previous owner thought the dark color was dirt or tarnish. The knobs, crank, hinges - all metal parts- had the antique bronze finish. Only the tone arm looked different after the "cleaning".
Matt
Re: WANTED: Door hardware for VV8-12
Posted: Thu Jun 18, 2015 8:22 pm
by DGPros
That's interesting. The middle knobs have a gold look while the outer , larger knob, has a copper look. It didn't take much to rub the darkness off them so I assumed it was 90 years of crud. Are all yours the same size? Thanks for the info.
Re: WANTED: Door hardware for VV8-12
Posted: Fri Jun 19, 2015 10:21 am
by mattrx
All the knobs on mine are the same size, color and pattern. I am away from home right now, but will be home Sunday. I'll check my parts-I am sure I have one or two of these knobs. I bought a "LOT" of parts via eBay a while back and there were some of these in the lot.
Matt
Re: WANTED: Door hardware for VV8-12
Posted: Fri Jun 19, 2015 10:31 am
by DGPros
Thanks Matt I appreciate that.
Re: WANTED: Door hardware for VV8-12
Posted: Sat Jun 20, 2015 11:28 pm
by mattrx
We got home late tonight instead of tomorrow. Here are a couple of pics. One of the knobs I have and one of my machine. Hope this helps. PM me if you need any of the 3 knobs.
Thanks,
Matt
Re: WANTED: Door hardware for VV8-12
Posted: Sun Jun 21, 2015 1:10 pm
by mattrx
PM sent.
Re: WANTED: Door hardware for VV8-12
Posted: Sun Jun 21, 2015 1:31 pm
by DGPros
mattrx wrote:My 8-12 has the "antique bronze" finish on the interior parts, and he knobs are the same finish. If you cleaned them too extensively, they will then just look like the brass underneath the original finish. I've read here on the forum somewhere about darkening the look back toward its original color with an acid wash.
My recent 8-35 purchase had a tone arm that had been cleaned too extensively and it looked almost gold. The previous owner thought the dark color was dirt or tarnish. The knobs, crank, hinges - all metal parts- had the antique bronze finish. Only the tone arm looked different after the "cleaning".
Matt
Since my tone arm and other parts are gold I just assumed the knobs would be also. It seems though, as far as I can see in pictures, that the knobs are more of antique bronze.