The Talking Machine Forum — For All Antique Phonographs & Recordings

Posted: **Thu Sep 22, 2016 9:37 pm**

Hello all

I know several of you are into music boxes too. I recently purchased a Symphonion box with 7-⅝ inch discs. The crank is from a Columbia machine, it is the short slotted crank. The original is slotted, with what seems to be about a 3" handle. The winding shaft is about ⅜" as I recall. I am searching for an original or repro of the correct crank, see pics. Any leads appreciated!
Thanks

John Robles

Posted: **Fri Sep 23, 2016 10:13 am**

John,
I looked for this same crank for several years, then decided to make my own...

Posted: **Fri Sep 23, 2016 4:05 pm**

Actually, my crank is larger, since it goes to a 15" Symphonion machine... Is your crank pic from a machine you have access to for actual dimensions?
That crank would not be too dificult to make...

The Talking Machine Forum — For All Antique Phonographs & Recordings

WANTED: Symphonion Music Box Crank (leads appreciated)

WANTED: Symphonion Music Box Crank (leads appreciated)

Re: WANTED: Symphonion Music Box Crank (leads appreciated)

Re: WANTED: Symphonion Music Box Crank (leads appreciated)